Skip to main content Skip to search Skip to main navigation
Filter products
VBF Stahl BL 500
VBF Stahl BL 500

Built in 1997  Size:  max 380x270 mm  Speed:  max 1500-3360 c/h  Book block thickness:  max 70 mm  Size:  min 100x100 mm  Book block thickness:  min 5 mm  Size:  max 270 x 380 mm  min 100 x 100 mm  Product thickness:  max 70 mm  min 5 mm  Speed:  max 3.300 c/h Equipment  • CAC/COS-automatic setup  • main engine frequenzcontroled  • automatic central lubrication system  • machine frame for 5 stations  • infeed with IR warm up  • automatic thickness control  rounding and backing station  5 stations book block preparation  • marking ribbon stick device  1. station  • gluing unit  2. station  • gauzing unit  3. station  • gluing unit  4. station  head and tailbanding unit  5. station  • pressing unit  casing-in machine  • cover belt  • cover magazin  • cover rounding station  book pressing and forming machine  • book pressing and forming machine EP 508  • delivery to the right  standard equipment  • 1 set of operator manuals  • 1 spare part catalogue  • 1 set of electrical diagrams  • 1 set of standard tools  • standard equipment

Ref.-Nr:
25550
Manufacturer:
Stahl
Rima RS 3210B
Rima RS 3210B

Built in 2004  Speed: 90.000 cph (product permitting)  - min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75")  - max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68")  - max pagination: 48p  - Product orientation: Spine leading  - Low Infeed - Infeed height (min/max in mm): 600-1200 mm  - Waste gate - Stream Aligner / Jogger  - Single squeeze roller - Laser Counter, model: Baumer Scatec-1  - Upper bin height in mm: 210 mm  - Upper Bin with 3 forks  - Turntable with compression plates  - max Stack height in mm: 330 mm  - Servo turntable  - Pneumatic pusher  - Delivery Direction to the right  - Delivery height in mm: 876 mm (34.50“)  - Air Delivery Table included - Over all length equipment: 2650-2950 mm  - Over all width equipment: ~700 mm  - Over all height equipment: ~1800-1950 mm  - Input Power: 3 kVA, 50/60 Hz, 3 ~  - Air requirement: 170 l/min @ 5.5 bar (6 cfm @ 80 psi)  - Weight: 945 kg (2100 lb)  - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs)  - Mechanical / electrical machine test possible  - Condition: cleaned & in working conditions

Ref.-Nr:
25485
Manufacturer:
Rima
Kolbus ZU 804
Kolbus ZU 804

Built in 2003  Size:  max 460 x 310 mm  min 125 x 100 mm  Pile height magazine: max 240 mm  Speed: max 8.000 c/h Equipment:  gathering machine  • 24 stations

Ref.-Nr:
25481
Manufacturer:
Kolbus
Cyklop pallet packaging line
Cyklop pallet packaging line

Built in 2001/2009 Pallet charge:  Length 1.200 mm  Width 800-1.000 mm  Height 800-2.200 mm  Wire diameter 76 mm  Diameter of film reel max 400 mm  Web width max 500 mm  Film thickness 15-35 µm Equipment infeed belt strapping machine XZE 211 height of width max. 2.200 mm height of opening max. 2.400 mm belt guide distance 625 mm diameter of film reel 60 mm role division 65 mm conveying speed 8-15 m/min belt transfer speed 2,9 m/s belt clamping force of the strapping unit adjustable up to 3.200 N press capacity adjustable from 5 to 30 kN post-press time 30 seconds machine colour RAL 5003 control panel colour RAL 7032 noise level 91dB (A) nach DIN 45635 Teil 27 pallet rim width 800 mm length 1.200 mm height 500-1.300 mm weight up to 800 kg strapping material belt quality PET belt width 13 mm belt thickness 0,4-1,15 mm tandem plastic tape dispensers KAZ with locking unit stretch wrapper GL-1020-M

Ref.-Nr:
25477
Manufacturer:
Cyklop
Wohlenberg Golf 18
Wohlenberg Golf 18

Size:  max 320 x 260 x 40 mm  min 150 x 100 x 2 mm  Book block thickness:  max 40 mm  min 2 mm  Cover size:  max 560 x 325 mm  min 202 x 150 mm  Speed:  max 5.000 c/h  Power requirements 24 kW (220/380V, 50Hz)  Length 7.543 mm  Width 2.400 mm Equipment  gathering machine:  chain tensioner with hand fed  20 stations  missing sheet and double sheet control  perfect binder  18 clamps  milling and roughening unit  hotmelt spine and side gluing unit  pile cover feeder  cover pressing station  lay down device  standards  1 set of operator manuals  standard equipment  information:  condition: very nice machine in good working condition

Ref.-Nr:
25444
Manufacturer:
Wohlenberg
Wohlenberg Vario S 26
Wohlenberg Vario S 26

Built in 1990  Size:  max 460 x 305 x 60 mm  min 140 x 103 x 2 mm  Book block thickness:  max 60 mm  min 2 mm  Cover size:  max 470 x 655 mm  min 140 x 210 mm  Speed:  max 7.000 c/h Equipment  gathering machine:  gatherer ZTM 370 x 20  missing sheet and double sheet control  criss-cross delivery  perfect binder:  26 clamps  milling station  spine preparation station  dust extraction  fume extraction  hotmelt spine gluing unit  2nd hotmelt spine gluing unit  hotmelt side gluing unit  stream cover feeder  2. cover pressing station  lay down device  standards:  1 set of operator manuals  1 set of electrical diagrams  1 set of standard tools

Ref.-Nr:
25443
Manufacturer:
Wohlenberg
MBO Z 2
MBO Z 2

Baujahr: 2006 Format max: 450 x 320 mm Format min: 150 x 80 mm Einlaufhöhe max: 950 mm Einlaufhöhe min: 450 mm Leistung max: 40 - 160 m/min Bogenleistung max: 12.000 c/h Produktdicke max: 6 mm Kraftbedarf: 0,37 kW (220/380V, 50Hz) Ausstattung •: Kreuzbruch-Falzschwert • Fahrbar • 180° schwenkbar • Spiralwalzen

Ref.-Nr:
25391
Manufacturer:
MBO
Ideal 6550
Ideal 6550

Build in 1983 Equipment 2 knives

Ref.-Nr:
25376
Manufacturer:
Ideal
MBO T 800/66
MBO T 800/66

Built in: 1999  Size: max 820 x 1.750 mm  Size with continuous feeder  max 820 x 1.750 mm  min 150 x 150 mm  Speed: max 205 m/min  Length with continuous feeder: 7.680 mm  Width: 3.210 mm    Equipment  feeder:  continuous feeder  1st folding unit:  6 buckle plates  motorized setting of buckle plates  rear-mounted slitter shafts  2nd folding unit:  working width max. 68 cm  6 buckle plates  motorized setting of buckle plates  rear-mounted slitter shafts  peripheral units and deliveries  belt delivery

Ref.-Nr:
25374
Manufacturer:
MBO
Herzog & Heymann KL 112 -500
Herzog & Heymann KL 112 -500

Built in: 1986  Size:  max 350 x 500 mm  min 50 x 70 mm  Speed: max 30 - 130 m/min  Buckle width: min 18 mm Equipment  flat pile feeder  1st folding unit:  6 buckle plates

Ref.-Nr:
25367
Manufacturer:
Herzog & Heymann
Müller Martini Stehbogenanleger für 3681
Müller Martini Stehbogenanleger für 3681

Equipment: 1 feeders 3681

Ref.-Nr:
25366
Manufacturer:
Müller Martini
Krause-Biagosch FY 43 UB-69
Krause-Biagosch FY 43 UB-69

Size max: 430 x 300 mm  Book thickness: max 60 mm  Speed max: 6000 c/h  Height: 1400 mm  Width: 1600 mm  Depth: 900 mm  Weight: 560 kg (approx.)

Ref.-Nr:
25360
Manufacturer:
Krause-Biagosch
DAN Pallettierer
DAN Pallettierer

Rebuild: 2018  Size max: 370x290x230 mm  Size 284x230 mm  Pallet size: 1000x1200 mm Equipment  turning device in the infeed  slip sheet feeder  pallet dispenser PT

Ref.-Nr:
25358
Manufacturer:
DAN
Kolbus DA 270
Kolbus DA 270

Built in 2003  Size  max 670x390 mm  min 205x140 mm  Speed 3.900 c/h

Ref.-Nr:
25352
Manufacturer:
Kolbus
Hang 106 DTK-4
Hang 106 DTK-4

Equipment: 4 spindle

Ref.-Nr:
25340
Manufacturer:
Hang
MBO T 45/4X
MBO T 45/4X

Size  max 460 x 650 mm  min 105 x 150 mm  Speed  max 160 m/min  Power requirements 2,3 kW (220/380V, 50Hz)  Length 2.610 mm  Width 1.100 mm Equipment  feeder:  flat pile feeder  counter  1st folding unit:  4 buckle plates  noise prevention  2nd folding unit:  knife-folding unit  delivery  belt delivery

Ref.-Nr:
25339
Manufacturer:
MBO
Siat AF 3 S.CF 2.4
Siat AF 3 S.CF 2.4

Ref.-Nr:
25338
Manufacturer:
Siat
Wohlenberg Golf 320
Wohlenberg Golf 320

Equipment: gathering machine:  • chain tensioner with hand fed  • 15 stations  • criss-cross delivery  perfect binder  • 18 clamps  • milling and roughening unit  • hotmelt spine gluing unit  • hotmelt side gluing unit  • premelter  • pile cover feeder  • cover pressing station  • gauzing station  • 2. cover pressing station  • stack delivery   

Ref.-Nr:
25329
Manufacturer:
Wohlenberg
Müller Martini Normbinder 3002 NB 3 SF
Müller Martini Normbinder 3002 NB 3 SF

Size max 510 x 305 x 60 mm  Size min 140 x 100 x 3 mm  Cover size max 642 mm  Cover size min 203 mm  Speed max 12.000 c/h Equipment   gathering machine  • 18 stations • 18 feeders 3661-210 SF intermediate elements  • spiral race away • jogging element perfect binder  • 25 clamps • clamp pitch 24" • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • SF stream cover feeder • SF cover nipping and pressing station • lay down device

Ref.-Nr:
25326
Manufacturer:
Müller Martini
Stahl VFZ-52
Stahl VFZ-52

Built in 1991 Size: max 520 x 360 mm min 120 x 100 mm Infeed height: max 915 mm min 515 mm Speed: max 25 - 160 m/min Speed: 30.000 c/h Equipment Mobile knife unit VFZ 52 • Accessories • 1 set of operating manuals • 1 set of electrical diagrams • 1 set of tools • 1 spare part catalogue • Standard equipment

Ref.-Nr:
25317
Manufacturer:
Stahl
Motter Stitcher
Motter Stitcher

In line stitching unit for Web Offset Presses

Ref.-Nr:
25304
Manufacturer:
Motter Printing Equipment
Müller Martini Trendbinder 3009
Müller Martini Trendbinder 3009

Built in: 1997  Size: 510 x 305 x 60 mm  Speed: 7.000 c/h Equipment:  gathering machine  • 18 stations  • 18 feeders 3690/24  • reject gate 3614  • jogging element  perfect binder  • 18 clamps  • clamp pitch 24"  • milling and roughening station  • hot melt spine gluing unit  • hot melt side gluing unit  • 2 premelters  • stream cover feeder  • cover nipping and pressing station  • 2nd cover pressing station

Ref.-Nr:
25299
Manufacturer:
Müller Martini
Müller Martini Presto
Müller Martini Presto

Built in: 2002  Working hours: 10.688 thsd.h  Size:  max 365 x 305 mm  min 105 x 115 mm  Product thickness:  max 15 mm  min 6 mm  Speed:  max 9.000 c/h  min 2.000 c/h Equipment:  gathering chain & feeder  • 10 station gathering track & chain  • 10 automatic feeders  • 1 cover folder feeder 1528  stitching unit  • wire unwind device  • stitch control  • 2 stitching heads HK 75  three knife trimmer  • three knife trimmer 1522  knives  • 2 sets of knives

Ref.-Nr:
25292
Manufacturer:
Müller Martini
Rima RS-3110SL 13
Rima RS-3110SL 13

Built in 2003  Size:  max 320 x 320 mm  min 133 x 152 mm  Pile height:  max. 330 mm  Speed:  max 100.000 Ex./h

Ref.-Nr:
25288
Manufacturer:
Rima