Built in: 1999 Size max: 390 x 300 mm Size min: 125 x 95 mm Book thickness max: 80 mm Book thickness min: 10 mm Book block thickness min: 8 mm cover size max: 900 x 390 mm Jack material: 60-250 g/sqm Jack material min: 270x 125 mm infeed height: adjustable 900 mm Speed max: 25-60 c/min Length: 6.620 mm Width: 1.250 mm Height: 1.750 mm Weight: 2.300 kg (approx.)
- Ref.-Nr:
- 26301
- Manufacturer:
- Müller Martini
Horizontal baling press Built in 2008 Overall dimensions w x h x l: 1.900 x 2.400 x 9.100 mm Weight: 6.600 kg Press capacity: 420 kN Motor 400V: 22 kW Pressing cycle: 60 Sec. Press chamber w x h x l: 800 x 1.000 x 3.650 mm Loading aperture: 2.000 x 740 mm Loading height: 1.250 mm Bale size w x h x l: 800 x 1.000 x 1.400 mm Bale weight: 400-600 kg Binding: 5 h
- Ref.-Nr:
- 26217
- Manufacturer:
- Roither
Built in 2001 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification
- Ref.-Nr:
- 26213
- Manufacturer:
- Affeldt
Build in 2000 Film wrapping machine max speed: 20 bundles/min max products width: 200-420 mm max products length: 200-420 mm max products height: 50-400 mm Operation: from left or right Electrical: 400 VAC, 3 Ph, N+PE, 50 Hz, 2,5 kW Dimensions (L x W x H): appr. 1100 x 950 x 2100 mm Weight: ~550 kg Packaging material: PE flat film, reel width 500 mm, thickness 12-80 µm, film reel diameter max 350 mm
- Ref.-Nr:
- 26212
- Manufacturer:
- Affeldt
Built in: 2000 Film wrapping machine max speed: 20 bundles/min max products width: 200-420 mm max products length: 200-420 mm max products height: 50-400 mm Operation: from left or right Electrical: 400 VAC, 3 Ph, N+PE, 50 Hz, 2,5 kW Dimensions (L x W x H): appr. 1100 x 950 x 2100 mm Weight: ~550 kg Packaging material: PE flat film, reel width 500 mm, thickness 12-80 µm, film reel diameter max 350 mm
- Ref.-Nr:
- 26194
- Manufacturer:
- Affeldt
Built in 1998 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification
- Ref.-Nr:
- 26164
- Manufacturer:
- Affeldt
Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): straight Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26046.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Right hand palletizer (palletizing to the right of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26046.40 Includes pallet conveying, reference-no: 26046.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min @ 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request
- Ref.-Nr:
- 26046
- Manufacturer:
- Segbert
Description/configuration: Palletizing of strapped, film wrapped or loose (product permitting!!) bundles. With blocking unit for stable bundles. Infeed with turning device for variable rows which are combined to a layer. Each finished layer is then placed onto the pallet. Includes pallet conveying and empty pallet terminal. Layout available min format product: 145 mm x 200 mm max format product: 300 mm x 430 mm max stack height: 50-300 mm max stack weight: 18 kg max speed for strapped / film wrapped bundles: up to 36 bundles/min max speed for loose bundles (only with Blocking Unit!): up to 24 bundles/min max palletizing height (incl. pallet): ~1600 mm Simple palletizer (one line) Low bundle infeed Infeed height: ~870 mm Product orientation at infeed palletizer (standard): Spine to the side Blocking unit in front of infeed (model): VB 95 Reference-# blocking unit: 26027.30 Serial Number blocking unit: 147 Infeed with flying cross (turning device) for bundles Infeed with emergency delivery for bundles (straight out) Left hand palletizer (palletizing to the left of the infeed) With slip sheet dispenser Empty pallet dispenser (model): PT Reference-# empty pallet dispenser (pallet terminal): 26027.40 Serial number empty pallet dispenser (pallet terminal): 132 Includes pallet conveying, reference-no: 26027.50 Conveying for a pallet width of 800 & 1000 mm Pallet conveying elevated Height of pallet conveying: ~300 mm Configuration of pallet conveying: straight Optional equipment: additional infeed conveyors (as shown on layout) Over all length equipment: ~5600 mm Over all width equipment: ~5000 mm Over all height equipment: ~3400 mm Input Power: ~7 KVA, 50/60 Hz, 3 ~ Voltage: 400 V 3Ph N, PE, 50 Hz Air requirement: 0,35 Nm3/min @ 6 bar Weight: ~4000 kg Equipment at warehouse Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Condition: as is Machine available: upon request
- Ref.-Nr:
- 26027
- Manufacturer:
- Segbert
Built in 2006 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification
- Ref.-Nr:
- 26004
- Manufacturer:
- Affeldt
Built in: 2000 Film wrapping machine Speed bundles/min 20 Pakete/min Package width 200-420 mm Package length 200-420 mm Packet height 50-400 mm Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical power 2,5 kW Dimensions (L x W x H) 1100 x 920 x 2100 mm Compressed air 280 l/min @ 6 bar Packaging material: PE flat film Reel width 500 mm Film thickness 12-80 mµ Diameter of film reel max 350 mm
- Ref.-Nr:
- 26002
- Manufacturer:
- Affeldt
Built in 1997 Rebuilt 2019 Size: max 450 x 320 mm min 120 x 100 mm Speed: max 6.000 c/h Equipment • 18 stations • missing sheet and double sheet control • criss-cross delivery standards: • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment • Condition: cleaned and checked
- Ref.-Nr:
- 25989
- Manufacturer:
- Müller Martini
Built in: 2003 Size: max 370 x 320 x 50 mm min 140 x 105 x 2 mm Mechanical speed: 4.000 c/h Equipment gathering machine: 2 additional handfed stations Wohlenberg Sprinter 7009 16 stations missing sheet and double sheet control criss-cross delivery perfect binder: 15 clamps spine preparation station milling and roughening unit dust extraction fume extraction hotmelt spine gluing unit hotmelt side gluing unit 2 premelters pile cover feeder plates-chain transport conveyor system standards: 1 set of operator manuals 1 set of electrical diagrams 1 set of standard tools 1 spare part catalogue
- Ref.-Nr:
- 25988
- Manufacturer:
- Wohlenberg
Size: max 340 x 260 mm; min 90 x 115 mm Size (without lap): max 340 x 250 mm; min 90 x 115 mm lap: max 15 mm folio lap: min 6 mm low folio lap: min 8 mm Product size, stitching unit: max 340 x 260 mm; min 210 x 155 mm booklet thickness: max 6 mm Mechanical speed 1:1: max 25.000 t/h Mechanical speed 1:2: max 30.000 t/h Equipment gathering chain & feeder • 8 station gathering track • 8 single base • 6 feeders 416 • product gluer 423 stitching unit • stitching unit 430 • 15" inch chain pitch • wire unwind device • thickness control/ plus-minus • 4 stitching heads three knife trimmer • three knife trimmer 426 knives • 2 sets of knives delivery • compensating stacker Robusto optional Equipment: --- not included --- • crane system • bundle feeder • print roll feeder • additional stations • card gluer • div. conveyer belts • compensating stacker • strapping machines • wrapping machines • Palletizer
- Ref.-Nr:
- 25950
- Manufacturer:
- Müller Martini
Build in 2001 - main productfeeder - opening station - 5 Inserting stations - rubin filmwrapping station - reject unit - shrink tunnel
- Ref.-Nr:
- 25914
- Manufacturer:
- Müller Martini
Build in 2000 - main productfeeder with attachment strap - opening station - 6 Inserting stations - rubin filmwrapping station - reject unit - shrink tunnel
- Ref.-Nr:
- 25912
- Manufacturer:
- Müller Martini
Built in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm (@ infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request
- Ref.-Nr:
- 25891
- Manufacturer:
- Rima
Build in 2004 Description/configuration: Complete line for automatic pallet strapping, automatic stretch-wrapping of pallets. Includes fully automated pallet conveying. Line with ""straight""-configuration, built with chain conveyors and configured as follows: > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.01 > pallet strapper Cyklop XZE-3111, REF 25778.30 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.02 > Straight chain conveyor underneath wrapper, motorized, travel is long side leading, l~2600 mm, REF 25778.03 > ring style pallet film wrapper Cyklop GL 2000, REF 25778.40 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04 > Straight chain conveyor, motorized, travel is long side leading, l~1100 mm, REF 25778.04" Layout available max speed in pallets/h: 50 pallets/h Chain conveyor Pallet width of up to 800 mm Pallet length of up to 1200 mm max height full pallet (max passage height): ~1700 mm Height of pallet conveying (min=300mm): ~400 mm max weight full pallet: ~1500 kg Over all length equipment: ~8000 mm Over all width equipment: ~6000 mm Over all height equipment: ~3500 mm Input Power: ~15 kw (whole line) Voltage: 400 V, 3 Ph, 50 Hz Air requirement: 6 bar Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1,5 hrs), Leipzig (~2hrs), Berlin (~2,5 hrs) Condition: cleaned & in working conditions Machine available: upon request
- Ref.-Nr:
- 25778
- Manufacturer:
- Cyklop
Built in: 2009 - Type of strapping: single, double, multiple - max speed for single strap: up to 40 bundles/min - max speed for parallel (double) strap: up to 20 bundles/min - min bundle dimensions (w x l): ~180 x 130 mm - max bundle dimensions (w x l): ~580 x 510 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~20 kg - Infeed / outfeed (conveying) height: ~800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 160/180/200 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~650 mm - Over all width equipment: ~1750 mm - Over all height equipment: ~1950 mm - Input Power: ~1,1 kW - Voltage: 400 VAC, 3Ph, N, PE, 50 Hz - Air requirement: ~8 l/Umreifung @ 6 bar / ~8 l/cycle @ 6 bar - Weight: ~500 kg - Operator Manual included as print-out on paper - Optional Equipment: Can be combined with a in-line strapping machine to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.
- Ref.-Nr:
- 25687
- Manufacturer:
- Schneider Ozga
Built in: 1997 Size: max 480 x 320 mm; min 200 x 110 mm Mech. Speed: 1,0 m/s Air requirement (6 bar): 5 m³/h Weight: 4.100 kg (approx.) Equipment • delivery right
- Ref.-Nr:
- 25624
- Manufacturer:
- Müller Martini
Built in 2008 Sheet size 800 x 1140 mm section height max 160 mm
- Ref.-Nr:
- 25601
- Manufacturer:
- Baumann
Built in 2008 lifting capacity 650 kg Stroke height 1.000 mm Required power max 2,43 kVA Platform width 1.150 mm Platform depth 790 mm Total width 1.365 mm Total depth 1.190 mm Total height 1.480 mm Weight 450 kg (approx.)
- Ref.-Nr:
- 25600
- Manufacturer:
- Baumann
Built in 1990 Size max 720 x 1.040 mm Feeding height max 140 mm lifting capacity 1.000 kg Power requirements 6,7 kW (220/380V, 50Hz) Length 2.400 mm Width 1.620 mm Height 2.090 mm Weight 990 kg (approx.) Equipment • with forks • airing device (2 air jets, 1 blower)
- Ref.-Nr:
- 25598
- Manufacturer:
- Busch


