New
Kolbus HD 142.P
Built in 2003Size trimmed max 300 x 420 x 80 mm min 100 x 100 x 2 mmSize max 305 x 430 mmPile height 80 mmPress capacity max 20 kNSpeed max 3.900 c/hAir pressure 6 barCompressed air 40 Nm³/h - 6 barElectric supply 400/50 V/Hz/ALength 3.300 mmWidth 3.060 mmHeight 1.740 mmWeight 5.170 kg (approx.) Equipment • copilot • right hand infeed • feeder • control with touchscreen • equipment for changing the format
Ref.-Nr: 28207
Manufacturer: Kolbus
*



Müller Martini Orbit
Three knife trimmer automatic with integrated pre stackerBuilt in 2008- Colour monitor with touchscreen- Infeed conveyor- Right hand infeed- Automatic hopper feeder for inline production- Exchangeable cutting tables (standard set)- Knife pre-setting device- Set of knife holders: 2Mechanical speed 1,000 to 7,200 cycles/hrSizes untrimmed Standar Size Maximum 384 x 320mm (15 1/16" x 12 5/8")(Spine length x booI‹ width) Minimum 140 x 72mm (5 1/2" x 2 13/16") Large size Maximum 445 x 320mm (17 1/2" x 12 5/8") Small size Minimum 110 x 72mm (4 5/16" x 2 13/16")Sizes trimmed Standar Size Maximum 304 x 303mm (12" x 11 7/8")(Spine length x book width) Minimum 136 x 70mm (5 5/16" x 2 3/4") Large size Maximum 434 x 303mm (17 1/16" x 11 7/8") Small size Minimum 100 x 70mm (3 7/8" x 2 3/4")Book thickness Maximum 80mm (3 1/8") Minimum 2mm (1/16")Ttim Front Maximum 40mm (1 5/8") Minimum 2mm (1/16") Head/Food Maximum 40mm (1 5/8") Minimum 2mm ('/.") Power consumption 20 kVACompzossed air connection 40 Nm*/h at 6 barExhaust 2100 Nm’/h at v = 25 mlsWei ht 5500 (12 125 bs )
Ref.-Nr: 27944
Manufacturer: Müller Martini
*





Kolbus HD 153
Built in 2009 Equipment - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition
Ref.-Nr: 27905
*




Kolbus HD 153
Year 2007- Co-Pilot with touchscreen- Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): 4 - 18 - Knife pre-setting device - Sets of knives: 2 Condition: cleaned in good working condition
Ref.-Nr: 27904
*





Müller Martini Merit S
Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment
Ref.-Nr: 27177
Manufacturer: Müller Martini
*




Perfecta Trimstar 110
Built in: 2002 Size trimmed: max 300 x 400 mm, min 85 x 115 mm Size untrimmed: max 320 x 460 mm, min 100 x 125 mm Speed: max 6.600 c/h Equipment: • automatic infeed with integrated counter stacker • cut counter • offcut blower • 1 set of clamping plates and holders • 1 set of plate tables • 3 sets of cutting sticks • 2 sets of knives • external device for knife changing including setting gauge • central lubrication system • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • standard equipment
Ref.-Nr: 26559
Manufacturer: Perfecta
*






Kolbus HD 151 P
Built in: 1998 Size:  max 310 x 400 x 80 mm Size trimmed:  max 300 x 388 x 80 mm  min 100 x 120 x 2 mm Speed:  max 6.000 c/h Feeding height:  max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)
Ref.-Nr: 25990d
Manufacturer: Kolbus
*



Müller Martini Zenith
Built in 1996 Size max 304 x 340 mm min 146 x 103 mm Speed max 7.000 c/h Equipment  • 2 sets of knife holders • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of quick change cassettes standard size
Ref.-Nr: 24917a
Manufacturer: Müller Martini
*


Müller Martini Zenith-S
Built in 2004 Size:  max 384 x 340 mm  min 140 x 103 mm Size trimmed:  max 304 x 310 mm  min 136 x 100 mm Book thickness:  max 70 mm  min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment  equipment for changing the format: - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives
Ref.-Nr: 24886a
Manufacturer: Müller Martini
*





Müller Martini 3670
Built in: 1993 Size:  max 350 x 440 mm min 146 x 103 mm Size trimmed:  max 310 x 420 mm min 140 x 100 mm Product thickness:  max 70 mm min 3 mm Speed:  max 6.600 c/h Equipment: • infeed belt  • automatic infeed with integrated pre stacker  • electronic counter  • external knife changing device  • 2 set of knives  • equipment for changing the format:  • 1 set of pressing plates & holders  • 1 set of table size extensions  • 1 set of quick change cassettes standard size  • 3 sets of cutting sticks
Ref.-Nr: 24837c
Manufacturer: Müller Martini
*


Kolbus HD 150
Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment  • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • belt delivery
Ref.-Nr: 24735
Manufacturer: Kolbus
*











Kolbus HD 151 P
Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories further information condition: as is, cleaned available: immediately
Ref.-Nr: 23886c
Manufacturer: Kolbus
*






Müller Martini 3670
Rebuilt: 2003 Size: 350 x 440 mm Speed: 6.600 c/h Equipment:  • belt feeding  • magazin with pusher and transporting belt  • automatic infeed with integrated pre stacker  • electronic counter  • external knife changing device Equipment for changing the format:  • 1 set of pressing plates & holders  • 1 set of size extensions  • 1 set of table quick change plates  • 3 sets of cutting sticks  • 2 set of knives  • central lubrication  • belt delivery  • stream delivery  • box delivery  • scrap dumping with blower  • scrap dumping over belts   
Ref.-Nr: 23544a
Manufacturer: Müller Martini
*






Müller Martini 3670
Built in: 1993 Size: 350 x 440 mm Speed: 6.600 c/h Equipment:  • right hand infeed equipment for changing the format: • 1 set of pressing plates & holders • 1 set of size extensions • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • info: with cassettes
Ref.-Nr: 23477c
Manufacturer: Müller Martini
*




Kolbus HD 150
Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment  • infeed from the left side • automatic infeed with integrated pre stacker • gripper loading • cut counter • automatical speed regulation • offcut blower • 1 set of clamping plates and holders • 1 set cutting table • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • delivery clamp
Ref.-Nr: 20565
Manufacturer: Kolbus
*