Filter
Spänex SHB 250
Spänex SHB 250
Spänex SHB 250
Spänex SHB 250
Spänex SHB 250
Spänex SHB 250
Spänex SHB 250
Spänex SHB 250
Spänex SHB 250
Spänex Brikettpresse SHB 250 Build in 1997
Ref.-Nr: 29214_29215
Manufacturer: Spänex

*
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
HP Designjet L65500 Printer Latex
Technical specifications • Print speeds: - Outdoor-quality prints: approximately 800 square feet per hour (70 square meters per hour)(8) - Indoor-quality prints: approximately 400 square feet per hour (35 square meters per hour)(8) • Print resolution: Up to 1200 x 600 dpi • Media - Handling: Roll feed - Types: supports most low-cost, uncoated, solvent-compatible media - Size: Up to 2.64m (104 inches) wide - Loading: Up to 110 kg (242 lb), up to 25 cm (9.8 inch) outside diameter • Printing - Six-ink printing with HP 786 3-liter Latex Designjet Ink Cartridges: cyan, magenta, yellow, light cyan, light magenta and black. - Three total HP Wide Scan Printheads (each contains two colors – cyan/black, yellow/magenta, light magenta/light cyan) - Ink Type: HP Latex Inks - Nozzles: 10,560 per printhead - Outdoor display: up to 3 years unlaminated, 5 years laminated(2) on a range of media - Indoor display: up to 5 years unlaminated, 10 years laminated(2) on a range of media - Ink drop: 12 picoliters • The HP 786 Designjet Maintenance Kit, including a printhead cleaner roll and two air filters, keeps the HP Designjet L65500 printer operating at peak performance. • Interfaces: Gbit Ethernet
Ref.-Nr: 26562
Manufacturer: Hewlett Packard

*
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Müller Martini 244 Jumbo
Build in 1995 min product size: 200 mm x 110 mm max product size: 480 x 320 mm Product thickness: 16-96 pages Log building: horizontal Log length: 800 - 1200 mm (compressed) Cycle time: min 45 s/log  High infeed: ~1600 mm End board feeder: ~80 end boards Thickness end boards: 8-13 mm Strapping: Strapex, 12 mm PP-strap Air: 5 Nm3/h @ 6 bar  Electrical: 380 VAC, 3 PH, 50 Hz, 4,5 kW Dimensions (L x W x H): appr. 4000 x 1500 x 2000 mm Weight: ~4100 kg with infeed conveyor (descending)  Log delivery to the right for pick-up with palletizer  As single machine or as complete line together with: Müller Martini 397 log palletizer for Euro pallets Müller Martini 230 pallet conveying system for Euro pallets
Ref.-Nr: 26557
Manufacturer: Müller Martini

*
Transform TS 1500-80 45° flow turn conveyor
Transform TS 1500-80 45° flow turn conveyor
Transform TS 1500-80 45° flow turn conveyor
Transform TS 1500-80 45° flow turn conveyor
Transform TS 1500-80 45° flow turn conveyor
Transform TS 1500-80 45° flow turn conveyor
Build in 2010 Flow Turn Cconveyor 45° belt conveyor, running direction left, with drive,  infeed / delivery height : ca. 800 mm inner radius: 600 mm belt width: 600 mm  
Ref.-Nr: 26522
Manufacturer: Transnorm

*
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~5.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.
Ref.-Nr: 26507
Manufacturer: KBK-Demag

*
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
Crane system with two fixed (l= ~6000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.
Ref.-Nr: 26506
Manufacturer: KBK-Demag

*
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
Crane system with two fixed (l= ~14.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Tilt prevention system allows smooth and perfectly parallel displacing of the running rails. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.
Ref.-Nr: 26505
Manufacturer: KBK-Demag

*
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
KBK Light Crane System for traveling hoists
Crane system with two fixed (l= ~7.000 mm) and three running rails (l= ~6.000 mm) with trolleys which allow the mounting of log clamps with hoist. Max weight per rail = 1.000 kg. Mounted from ceiling (no supporting steel structure included). Power supply via integrated conductor line inside the rails (no external wires). Compressed air with outside air pipes (not inside the rails). Option: chain hoist with log clamp to lift logs from a pallet onto a stream feeder.
Ref.-Nr: 26503
Manufacturer: KBK-Demag

*
Komfi Aspira Film laminating machine
Komfi Aspira Film laminating machine
Komfi Aspira Film laminating machine
Komfi Aspira Film laminating machine
Komfi Aspira Film laminating machine
Komfi Aspira Film laminating machine
Komfi Aspira Film laminating machine
Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.
Ref.-Nr: 26377
Manufacturer: Komfi

*
Roither Austropressen AP 50
Roither Austropressen AP 50
Roither Austropressen AP 50
Roither Austropressen AP 50
Roither Austropressen AP 50
Roither Austropressen AP 50
Roither Austropressen AP 50
Roither Austropressen AP 50
Horizontal baling press Built in 2008 Overall dimensions w x h x l: 1.900 x 2.400 x 9.100 mm Weight: 6.600 kg Press capacity: 420 kN Motor 400V: 22 kW Pressing cycle: 60 Sec. Press chamber w x h x l: 800 x 1.000 x 3.650 mm Loading aperture: 2.000 x 740 mm Loading height: 1.250 mm Bale size w x h x l: 800 x 1.000 x 1.400 mm Bale weight: 400-600 kg Binding: 5 h
Ref.-Nr: 26217
Manufacturer: Roither

*
Höcker extraction
Höcker extraction
Höcker extraction
Höcker extraction
Höcker extraction
Ref.-Nr: 24738
Manufacturer: Höcker

*
LOMA Wiegestrasse
LOMA Wiegestrasse
LOMA Wiegestrasse
LOMA Wiegestrasse
LOMA Wiegestrasse
LOMA Wiegestrasse
Built in 2006  Equipment - Ausschleusung • - Waage standard accessories • - Band
Ref.-Nr: 23347
Manufacturer: LOMA

*