Baujahr 2008Max format: 540 x 800 mmMin format: 150 x 190Max speed: 40.000 sh/hcounter 1st folding unit: kombi folding rollers rear-mounted slitter shaft noise prevention belt delivery

Horizontal stack press deliverySheet size min. (width × length) 120 × 100mmSheet size max. (width × length) 460 × 300mmProduct thickness max. 4mmPile length 800mmPressing force 8,000 NInfeed height 360-960mm

Baujahr 2007Max format: 540 x 800 mmMin format: 150 x 190Max speed: 40.000 sh/hHight adjustmentcounter folding unit: 2nd kombi folding rollers rear-mounted slitter shaft noise prevention 

Baujahr 2007Max format: 540 x 800 mmMin format: 150 x 190Max speed: 40.000 sh/hcounter 1st folding unit: kombi folding rollers rear-mounted slitter shaft noise prevention 

Baujahr 2005Max format: 540 x 800 mmMin format: 150 x 190Max speed: 40.000 sh/hcounter 1st folding unit: kombi folding rollers rear-mounted slitter shaft noise prevention belt delivery

Transport Type DualLength 51” + 33”, 130 cm + 85 cmHeight 27.5” - 39.5” (70 cm - 100 cm)Width 32” (82 cm)Max. product width 19” (48 cm)Belts 2 x 3” (8 cm) fixed center vacuum belts + 2 x 3” (8 cm) outside beltsOptional 17” (43 cm) wide beltSpeed Up to 500 ft/min (2.5 m/sec)PhysicalPower 110 / 220 VACWeight  485 lbs (220 kg)Specialty’s flexible vacuum transport basesheight adjustablevariable speedchange of movement direction (left/right)mobility (on wheels)very easy operation.These bases can be used as stand alone or in combination and can be fully interlocked to work inline with existingproduction lines or other modules.Dual BaseA dual base (2 bases in one frame with split belts) is perfect for mounting an inkjet system with a dryer (IR orUV).There is enough space for post-drying the ink under an IR or UV-curing stations. Heat resistant belts are available as an option.

Horizontal stack press deliverySheet size min. (width × length) 120 × 100mmSheet size max. (width × length) 460 × 300mmProduct thickness max. 4mmPile length 800mmPressing force 8,000 NInfeed height 360-960mm

Baujahr 2003Movable intermediate unit for handover of folded products with speed and level adaption (also used for acceleration).Independent speed control.width 460mm.

Baujahr 1999Max. Paper Size 52.00 x 0.00 cmflat pile feeder with suction headcounter MCS 1064 folding pockets in the parallel fold sectionsegmented folding rollersfollowing knife shaft2 folding knives in the cross fold section1 additional folding pocket after the 1st cross foldstream delivery

MBO mobile corner conveyor table ET 46with ball rail ET 46 can be swiveled through 180°suitable for both left and right installation.The ET 46 alignment ruler is equipped with a ball bar for standard products.Format: 46 cm

Built in: 2006 Infeed width: max 480 mm; min 150 mm Infeed length: max 320 mm; min 80 mm Infeed height: max 650 mm; min 450 mm Product thickness: max 60 mm Speed: max 160 m/min

Built in: 2008 Size max: 820 x 1.750 mm Size with pallet feeder: max 820 x 1.200 mm; min 150 x 270 mm Size with continuous feeder: max 820 x 1.750 mm; min 150 x 150 mm Speed: max 205 m/min Length with pallet feeder: 5.180 mm Length with continuous feeder: 7.680 mm Width: 3.210 mm Cross folding: 16 pages Equipment feeder  control: • Vacutable • Vacubelt • counter 1st parallel folding unit: • pre-slitter shafts • 4 buckle plates • motorized setting of buckle plates • spiral folding rollers • slitter shaft cassette MWK • noise prevention 1st cross-fold unit: • cross fold knife • buckle after cross-fold right • slitter shaft after cross-fold • spiral folding rollers 2 nd cross fold unit: • cross fold knife left • spiral fold rollers condition: • cleaned & checked available: • immediately

Baujahr                                         2006Format                           max        450 x 320 mm                                      min         150 x   80 mmEinlaufhöhe                   max        950 mm                                      min         450 mmLeistung                        max        40 - 160 m/minBogenleistung               max        12.000 c/hProduktdicke                 max        6 mmKraftbedarf                                   0,37 kW  (220/380V, 50Hz) Ausstattung                                  •   Kreuzbruch-Falzschwert      •   Fahrbar      •   180° schwenkbar      •   Spiralwalzen

Built in: 1999 Size: max 820 x 1.750 mm Size with continuous feeder  max 820 x 1.750 mm  min 150 x 150 mm Speed: max 205 m/min Length with continuous feeder: 7.680 mm Width: 3.210 mm  Equipment  feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Size:  max 500 x 700 mm  min 200 x 100 mm Speed:  max 15.000 c/h

Built in: 1986 Size:  max 350 x 500 mm  min 50 x 70 mm Speed: max 30 - 130 m/min Buckle width: min 18 mm Equipment  flat pile feeder 1st folding unit: 6 buckle plates

Size  max 460 x 650 mm  min 105 x 150 mm Speed  max 160 m/min Power requirements 2,3 kW (220/380V, 50Hz) Length 2.610 mm Width 1.100 mm Equipment  feeder: flat pile feeder counter 1st folding unit: 4 buckle plates noise prevention 2nd folding unit: knife-folding unit delivery belt delivery

Built in 1991 Size:  max 520 x 360 mm  min 120 x 100 mm Infeed height:  max 915 mm  min 515 mm Speed: max 25 - 160 m/min Speed: 30.000 c/h Equipment  Mobile knife unit VFZ 52 • Accessories • 1 set of operating manuals • 1 set of electrical diagrams • 1 set of tools • 1 spare part catalogue • Standard equipment  

Rebuilt: 2011 Size:  max 560 x 1.600 mm Size with flatpile feeder:  max 560 x 920 mm  min 150 x 200 mm Size cross fold:  min 150 x 200 mm Size threefold:  min 200 x 300 mm Speed:  max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment:  feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left delivery: • delivery A 56

Size with continuous feeder:  max 760x2000 mm  min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately

Built in 1996 Size max 520 x 840 mm min 140 x 180 mm Speed max 180 m/min Equipment feeder •   continuous feeder •   counter 1st folding unit •   4 buckle plates 2nd folding unit •   4 buckle plates peripheral units and deliveries •   belt delivery

Size max 360 x 460 mm min 80 x 100 mm Speed max 30.000 c/h

Built in 2003 Size max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Pile height 700 mm Equipment  feeder • flat pile feeder with Tremat suction head • counter DCT 500 1st folding unit • 4 buckle plates • buckle plates with swing deflectors • soft-pu steeel folding rollers • noise prevention 2nd folding unit • 4 buckle plates • buckle plates with swing deflectors • soft-pu steel folding rollers • noise prevention 3rd folding unit • attachable knife-folding unit • mobile knife unit KBK 52 peripheral units and deliveries • belt delivery equipment • pv pressure-vacuum pump

Built in 2003 Size max 400 x 650 mm min 140 x 180 mm Speed max 180 m/min Pile height max 680 mm Equipment  feeder • flat pile feeder • counter 1st folding unit • 4 buckle plates • pu steel folding rollers • noise prevention peripheral units and deliveries • attachable belt delivery