Filter
New
Solema Marte
Solema Marte
Solema Marte
Built in 2012Machine speed max. 100 products/minuteTurning movement speed max. 55 turns/minuteProduct (L x W x H) min. 130 × 100 × 3 mmmax. 480 × 330 × 80 mmPre-stacking station height max. 80 mm Pile height max. 210 mm
Ref.-Nr: 27903.18
Manufacturer: Solema

*
Krifft & Zipsner VB 160
Krifft & Zipsner VB 160
Krifft & Zipsner VB 160
Krifft & Zipsner VB 160
Krifft & Zipsner VB 160
Krifft & Zipsner VB 160
Krifft & Zipsner VB 160
Built in: 2006 Size: 1.600 x 2.100 mm  
Ref.-Nr: 27766
Manufacturer: Krifft & Zipsner

*
Müller Martini Merit S
Müller Martini Merit S
Müller Martini Merit S
Müller Martini Merit S
Müller Martini Merit S
Müller Martini Merit S
Müller Martini Merit S
Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment
Ref.-Nr: 27177
Manufacturer: Müller Martini

*
Müller Martini 3501+ 3605 Bookblock splitter
Müller Martini 3501+ 3605 Bookblock splitter
Müller Martini 3501+ 3605 Bookblock splitter
Müller Martini 3501+ 3605 Bookblock splitter
Built in 2003Size:max 510 x 320 x 60 mmmin 200 x 72 x 3 mmEquipment• turnover belt
Ref.-Nr: 27134
Manufacturer: Müller Martini

*
Eurocutter 2600
Eurocutter 2600
Eurocutter 2600
Eurocutter 2600
Eurocutter 2600
Eurocutter 2600
Eurocutter 2600
Eurocutter 2600
Machine number: 24032M025  Built in: 2004 Cutting width: max 2.600 mm Feeding height: 160 mm rear table length: 2.600 mm Front table length: 725 mm table height: 900-925 mm side table size: 750x570 mm machine depth: 4.180 mm Machine width: 4.400 mm Machine height: 1.720 mm continuous knife cycle rate: 40  hydraulic pressure: 1,5-65 kN minimum cut without false clamp: 40 mm Speed: 17,8 kW Weight: 8.900 kg Equipment  • chromed air table • side table right with air • side table left with air • digital program • program with color- display • 2 knives
Ref.-Nr: 27043
Manufacturer: Eurocutter

*
Polar 155 EMC Monitor
Polar 155 EMC Monitor
Polar 155 EMC Monitor
Polar 155 EMC Monitor
Polar 155 EMC Monitor
Cutting width: max 1.550 mm Feeding height: max 165 mm Feeding depth: max 1.550 mm Front table length: 750 mm Table height: 900 mm Power requirements: 5,5 kW (220/380V, 50Hz) Clamping pressure: max 5.500 daN, min 200 daN Width: 3.550 mm Depth: 2.950 mm Height: 1.730 mm Weight: 4.950 kg (approx.) Equipment  • air table • side table right with air • side table left with air • light barrier • program with 12" monitor • optical cutting line indicator • 2 knives standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 spare part catalogue • standard equipment • 1 set of standard tools
Ref.-Nr: 27000
Manufacturer: Polar

*
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Schneider Senator 115-Profi-Line
Rebuilt: 2009 Cutting width: max 1.150 mm Feeding height: max 140 mm Feeding depth: max 1.150 mm Front table length: 680 mm Table height: 900 mm Power requirements: 4 kW (220/380V, 50Hz) Clamping pressure: min 400 daN Clamping pressure: 4.500 daN Width: 2.333 mm Depth: 2.570 mm Height: 1.560 mm Weight: 3.600 kg (approx.) Equipment  • model "S-Line" • air table chrome plated with air • side table right with air • side table left with air • light barrier • 2 knives 1st station: stack lift Type: Profiline Model: PL10-100-H 2nd station: jogging table Type: Profiline Model: 0077 3rd station: paper cutter Type: Senator 115 Model: TSC 4th station: unloader Type: RS Model: SR0559
Ref.-Nr: 26734
Manufacturer: Schneider Senator

*
Perfecta Trimstar 110
Perfecta Trimstar 110
Perfecta Trimstar 110
Perfecta Trimstar 110
Perfecta Trimstar 110
Perfecta Trimstar 110
Built in: 2002 Size trimmed: max 300 x 400 mm, min 85 x 115 mm Size untrimmed: max 320 x 460 mm, min 100 x 125 mm Speed: max 6.600 c/h Equipment: • automatic infeed with integrated counter stacker • cut counter • offcut blower • 1 set of clamping plates and holders • 1 set of plate tables • 3 sets of cutting sticks • 2 sets of knives • external device for knife changing including setting gauge • central lubrication system • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • standard equipment
Ref.-Nr: 26559
Manufacturer: Perfecta

*
Hunkeler AS 1000
Hunkeler AS 1000
Hunkeler AS 1000
Hunkeler AS 1000
Hunkeler AS 1000
Hunkeler AS 1000
Hunkeler AS 1000
Built in 2004 Platform with hydraulic lift for ergonomic manual pile-down onto Euro-pallets. Hydraulic lifting via  hand or foot control . Lift height: 900mm max load: 1.000 kg Voltage: 400 / 50 Hz Pressure: 135 bar Dimensions (L x W x H): 1200 x 850 x 1200 mm
Ref.-Nr: 26539
Manufacturer: Hunkeler

*
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Gämmerler Rotationsschneidelinie RS134/D
Built in 2002 Equipment: Automatic rotary cutting line consisting of: 4 rotary cutters /Trimmers, Gämmerler RS134/D , 2 press stations, Gämmerler PS300, 3 lifting table elements, Büter, 4 adjustable corner-curve units, div . conveyor belts and feeder belts, div . control cabinets for controlling the entire system, the working platform, Sliding door cabinet with contents
Ref.-Nr: 26478
Manufacturer: Gämmerler

*
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment  copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories further information condition: as is, cleaned available: immediately
Ref.-Nr: 26445b
Manufacturer: Kolbus

*
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
Gämmerler RS 134
- Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: ~122 mm - max width product: ~530 mm - min length product: ~122 mm - max pagination product: 4-96p (product permitting) - max thickness shingled stream: up to 13 mm - infeed stream lap: ~25-100 mm - min trim width: ~5 mm - max trim width: ~65 mm - min product width after trim: ~118 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: ~800 mm - Trimming line - 1st trimmer knife left - Trimming line - 2nd trimmer knife left & right - To be used with segmented knives - Over all length equipment: ~1675 mm - Over all width equipment: ~1530 mm - Over all height equipment: ~1160 mm - Input Power: 7,5 kW - Voltage: 400 V, 3 Ph, N, PE - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~1100 kg per trimmer - Optional equipment: second EM 130 bump turn - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: in working conditions - Machine available: upon request Description: Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130
Ref.-Nr: 26356
Manufacturer: Gämmerler

*
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Built in 1997 Size: max 450 x 340 mm, min 140 x 100 mm Product thickness: max 70 mm, min 3 mm Infeed height: max 890 mm, min 800 mm Delivery height: 850 mm Speed: max 18.000 c/h Power requirements 1,35 kW (220/380V, 50Hz) Length 2.208 mm Width 1.500 mm Height 1.700 mm Weight 1.000 kg (approx.)        
Ref.-Nr: 26001g
Manufacturer: Müller Martini

*
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Müller Martini CB 16
Built in 1990 Size:  max 450 x 340 mm  min 140 x 100 mm Product thickness:  max 70 mm  min 3 mm Infeed height:  max 890 mm  min 800 mm Delivery height 850 mm Speed:  max 18.000 c/h Power requirements 1,35 kW (220/380V, 50Hz) Length 2.208 mm Width 1.500 mm Height 1.700 mm Weight 1.000 kg (approx.)
Ref.-Nr: 26001f
Manufacturer: Müller Martini

*
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Kolbus HD 151 P
Built in: 1998 Size:  max 310 x 400 x 80 mm Size trimmed:  max 300 x 388 x 80 mm  min 100 x 120 x 2 mm Speed:  max 6.000 c/h Feeding height:  max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)
Ref.-Nr: 25990d
Manufacturer: Kolbus

*
New
Wohlenberg Trim-Tec 45i
Wohlenberg Trim-Tec 45i
Wohlenberg Trim-Tec 45i
Wohlenberg Trim-Tec 45i
Built in 2003 Mechanical speed 900 - 2700 t/h Product height trimmed 145 - 380 mm Product widthtrimmed 100 - 300 mm Product thickness min 2 mm Feeding height 10 - 100 mm Equipment  • infeed belt from the right side • automatic infeed with integrated counter stacker • silicone spraying device • central lubrication • belt delivery • equipment for changing the format: • 1 set of clamp plates & plate holders • cutting plates 2-7 • 1 set cutting table plates • 3 sets of cutting sticks • 2 sets of knives • external knife changing device • 1 set of operator manuals • 1 spare part catalogue • standard equipment • 1 set of electrical diagrams • 1 set of standard tools • Condition: good working
Ref.-Nr: 25988d
Manufacturer: Wohlenberg

*
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Rima RS 830
Built in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC  - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm (@ infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr),  - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request
Ref.-Nr: 25891
Manufacturer: Rima

*
Wohlenberg 92 MCS 2
Wohlenberg 92 MCS 2
Wohlenberg 92 MCS 2
Cutting width max 920 mm Feeding height max 120 mm Feeding depth max 920 mm Front table length 600 mm Table height 890 mm Equipment • MCS II • air table • side table right • side table left • light barrier • 2 knives
Ref.-Nr: 25602
Manufacturer: Wohlenberg

*
BSB 3 L
BSB 3 L
BSB 3 L
Built in 2008 Sheet size 800 x 1140 mm section height max 160 mm
Ref.-Nr: 25601
Manufacturer: Baumann

*
Baumann NUP 650
Baumann NUP 650
Baumann NUP 650
Built in 2008 lifting capacity 650 kg Stroke height 1.000 mm Required power max 2,43 kVA Platform width 1.150 mm Platform depth 790 mm Total width 1.365 mm Total depth 1.190 mm Total height 1.480 mm Weight 450 kg (approx.)
Ref.-Nr: 25600
Manufacturer: Baumann

*
Busch SW 104 L2A
Busch SW 104 L2A
Busch SW 104 L2A
Built in 1990 Size max 720 x 1.040 mm Feeding height max 140 mm lifting capacity 1.000 kg Power requirements 6,7 kW (220/380V, 50Hz) Length 2.400 mm Width 1.620 mm Height 2.090 mm Weight 990 kg (approx.) Equipment • with forks • airing device (2 air jets, 1 blower)
Ref.-Nr: 25598
Manufacturer: Busch

*
Kolbus HD 140 P
Kolbus HD 140 P
Kolbus HD 140 P
Kolbus HD 140 P
Kolbus HD 140 P
Kolbus HD 140 P
Kolbus HD 140 P
Built in 1998 Size max 305 x 420 mm Size trimmed: max 300 x 400 mm  min 100 x 100 mm Book block thickness:  max 80 mm  min 2 mm Feeding height 80 mm Speed max 3.900 c/h Length 2.400 mm Width 3.060 mm Height 1.740 mm Weight 5.290 kg (approx.) Equipment  • automatic infeed with integrated pre stacker • gripper loading • cut counter • automatical speed regulation • offcut blower • Equipment for sheet-fed • 1 set of clamping plates and holders • 1 set cutting table • 3 sets of cutting sticks • 2 set of knives • automatic lock of knife adjustment and pressing block • external knife changing device • copilot • automatic setting of • - infeed device • - bookblock pressure • - cutting table • - side knives • - side gauges • - height of the delivery clamp • central lubrication • delivery clamp
Ref.-Nr: 25479
Manufacturer: Kolbus

*
Ideal 6550
Ideal 6550
Ideal 6550
Build in 1983 Equipment 2 knives
Ref.-Nr: 25376
Manufacturer: Ideal

*
Polar 107 ST
Polar 107 ST
Polar 107 ST
Polar 107 ST
Cutting width max 1.070 mm Feeding height max 135 mm Weight 2.850 kg (approx.) Equipment  air table • side table right • side table left • light barrier • 2 knives standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 spare part catalogue • standard equipment • 1 set of standard tools
Ref.-Nr: 25372
Manufacturer: Polar

*