Skip to main content Skip to search Skip to main navigation

german graphics · since 1985

Used printing & finishing machines

Paper cutters, printing presses, bookbinding and packaging machines – in stock in Helmstedt, Germany, available for inspection and ready for worldwide delivery.

All machinesNew in stock

Why german graphics

  • Trading used machines since 1985
  • Inspection on site in Helmstedt
  • Dismantling, transport & installation worldwide

Personal advice

+49 5351 3834-0

Mon–Fri, 9 am – 5 pm

drupa 2028 · 9–17 May · Düsseldorf

Visiting drupa? Let’s meet and talk about your machinery – in Düsseldorf or at our warehouse in Helmstedt.

Book a meeting
Skip product gallery

New in stock

New
Müller Martini Robusto Kreuzleger
Müller Martini Robusto Kreuzleger

Typ: 0451.0400 Maschinen Nr.: MMZO 1 161089-10 Baujahr: 2007 Format max: 480 x 330 mm Format min: 148 x 105 mm Leistung max: 30.000/18.000 c/h

Ref.-Nr:
27096MF
Manufacturer:
Müller Martini
New
Müller Martini Normbinder 3001 NB 2 S
Müller Martini Normbinder 3001 NB 2 S

Year: 1992-1997 Consisting of: Gathering machine Müller Martini 210 S Description: Chain tensioning station Number of gathering stations: 24 Pump Set up element Intermediate element with vibrating Side stitching unit Transfer into the binder Perfect binder Müller Martini Normbinder Description: 20 clamps Main milling station 1st spine preparation station Excluding dust extraction system Base for 1st spine glue system hotmelt spine glue unit, interchangeable Premelter for spine glue unit Base for side glue system Hotmelt side glue unit, interchangeable Premelter for side glue unit SF Stream cover feeder Scoring station Pump SF Nipping and pressing station Lay down device Transport system Escape delivery Three knife trimmer Kolbus 150 Description: Right hand infeed Precounter stacker Knife pre-setting device

Ref.-Nr:
28103
Manufacturer:
Müller Martini
New
Polar 155 E
Polar 155 E

Built in: 2000 Machine Number: 7021401 Cutting Capacities and Dimensions Cutting width: 1,550 mm (155 cm) Infeed depth: 1,550 mm Maximum cutting height: 165 mm Table height: 900 mm Front table length: 750 mm Operating Data Backgauge speed: up to 300 mm/s Cutting speed: up to 45 cycles/min Feed speed: 30 cm/s Clamping System Minimum pressure: 150 daN Maximum pressure: 6,000 daN Type: high-pressure hydraulic Electrical Data Voltage: 380–400 V Frequency: 50 Hz Installed power: approx. 5.5 kW

Ref.-Nr:
29123
Manufacturer:
Polar
New
Müller Martini Avanti
Müller Martini Avanti

Technical Data • Fully automatic perfect binding machine. • Suitable for books, catalogs, magazines and softcover production. • Modular design for integration with gathering, binding and trimming systems. • High-production industrial binding system. • EVA hotmelt adhesive application system. • Automatic cover feeder. • Automatic book block feeding. • Milling and spine preparation station. • Cover creasing and scoring unit. • Delivery conveyor system. • PLC-controlled operation with central control panel. Production Capabilities • Production speed: up to 6,000 cycles/hour depending on configuration. • Book block thickness range: approximately 2 to 60 mm. • Maximum book format: approximately 320 x 450 mm. • Minimum book format: approximately 100 x 105 mm. • Suitable for short, medium and long production runs. Features • Automatic thickness adjustment. • Electronic production monitoring. • Fast make-ready times. • Precise spine preparation. • Consistent adhesive application. • Robust industrial construction. • High reliability and low maintenance requirements. • Designed for continuous 24-hour production environments.

Ref.-Nr:
28823
Manufacturer:
Müller Martini
New
Rima RS 600+650
Rima RS 600+650

Built in: 2007 Rima RS 600 Description • Straight infeed • Infeed belt • Reject unit • Pressing station • Turnover belt • Delivery to right Technical Data Product Format • Dimension A: min. 100 mm / max. 340 mm • Dimension B: min. 180 mm / max. 500 mm • Dimension D: limited by dimensions A & B Product Thickness • Min.: 4 pages at 57 g/m² • Max.: 132 pages at 57 g/m² Compressed Log Length • Min.: 800 mm • Max.: 1,200 mm Infeed Height • Adjustable from 600 to 800 mm Delivery Table Height • 900 mm (left or right) Log Spacing at Infeed • Min.: 40 mm • Max.: 80 mm Product Orientation • Spine leading Speed • Up to 120,000 copies/hour • Cycle time: 25 seconds (depending on product) Electrical Requirements • 400 V, 3~, N, PE, 50/60 Hz • 40 A • Connected load: 28 kW Air Requirement • 110 l/min at 6 bar Weight • Approx. 3,500 kg Options • Left or right infeed • Left or right delivery table Rima RS 650 • Automatic compensating stacker for printed products. • Designed for magazines, newspapers, catalogs and bookbinding products. • Continuous high-speed stacking operation. • Servo-controlled stacking technology. • Gentle product handling for stable stack formation. • Low maintenance and high reliability. • Suitable for operation behind bindery equipment, inserters and packaging systems.

Ref.-Nr:
28822
Manufacturer:
Rima
New
Mosca RO TR-TRI 5
Mosca RO TR-TRI 5

Built in: 2007 Mosca RO-TR Fully automatic transverse strapping machine Capacity up to 40 bundles/minute PP strap width: 4 - 12 mm Heat-weld sealing system (24V) PLC control with touchscreen interface Automatic strap feeding and threading Automatic strap end detection Variable speed conveyor system Power supply: 400V / 3 Phase / 50-60Hz Power consumption: 2 kVA Weight: approx. 415 kg Features • Fully automatic inline operation • PLC control system • Touchscreen operator panel • Automatic strap feeding and threading • Automatic strap-end detection and ejection • Automatic empty-cycle loop ejection • Wear-free brushless DC drive technology • Variable conveyor speed • Electromechanical double press system Mosca RO-TRI-5 Fully automatic longitudinal inline strapping machine Capacity up to 36 bundles/minute Double strapping up to 18 bundles/minute Max. bundle size: 450 x 500 mm Max. bundle height: 400 mm Max. bundle weight: 25 kg PP strap width: 5, 6, 8 and 9 mm Heat-weld sealing system (24V) PLC control with touchscreen interface Variable speed conveyor system Automatic strap feeding and ejection system Power supply: 400V / 3 Phase / 50-60Hz Power consumption: 2 kVA Weight: approx. 430 kg

Ref.-Nr:
28820
Manufacturer:
Mosca
New
Schneider & Ozga TM 01-600X500
Schneider & Ozga TM 01-600X500

Built in: 2019 Technical Data • Strapping capacity: up to 15 single straps/minute • Parallel strapping capacity: up to 5 bundles/minute • Frame size (W x H): 600 x 500 mm • Maximum bundle weight: 25 kg • Strapping material: Polypropylene (PP) • Strap width: 5 - 12 mm • Strap thickness: 0.35 - 0.70 mm • Seal type: Thermal weld seal • Coil core diameter: 200 / 228 mm • Coil outside diameter: approx. 450 mm • Electrical supply: 230 V, 1 Phase, 50 Hz • Power consumption: 1.1 kW • Pneumatic pressure: 4 bar • Air consumption: 90 l/min (approx. 3 l/strap) • Strap tension: up to 200 N • Conveyor speed: 26 - 59 m/min • Machine weight: 306 - 420 kg (depending on configuration) Standard Features • Fully automatic operation • PLC control with touchscreen interface • Automatic strap feeding and detection • Variable conveyor speed • Adjustable strap tension • Maintenance-free direct drives

Ref.-Nr:
28268b
Manufacturer:
Schneider & Ozga
New
Schneider & Ozga TI 01
Schneider & Ozga TI 01

Built in 2018 Automatic in-line strapping in travel direction without bundle turning behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages. Type of strapping: Single in travel direction Max. speed for single strap: Up to 30 bundles/min Bundle Dimensions:- Min. bundle dimensions (W x L): approx. 160 x 130 mm- Max. bundle dimensions (W x L): approx. 560 x 480 mm- Min. bundle/package height: approx. 10 mm- Max. bundle/package height: approx. 400 mm- Max. bundle/package weight: approx. 25 kg Conveying System:- Infeed / Outfeed conveying height: 800 - 900 mm- Continuously adjustable conveyor speed- Metric input of strapping position Strapping System:- Type of sealing: Heat-weld sealing- Strapping material: Polypropylene (PP)- Number of strap coil dispensers: Single- Strap coil dispenser core width: 165 - 210 mm- Equipped with automatic strap feeding- Equipped with hold-down device- Equipped with interface to upstream/downstream equipment Machine Dimensions:- Overall length: approx. 840 mm- Overall width: approx. 1,250 mm- Overall height: approx. 1,750 mm Electrical Data:- Input power: approx. 0.5 kVA- Voltage: 230 VAC, 1 Ph, 50 Hz Air Requirement:- 2 l/cycle @ 6 bar Machine Weight:- Approx. 335 kg

Ref.-Nr:
28268a
Manufacturer:
Schneider & Ozga
New
Müller Martini 3001 Normbinder NB 8-50
Müller Martini 3001 Normbinder NB 8-50

Built in: 1995 Equipment • 18 feeders 3690/18 • endsheet gluing unit 3610 • endsheet feeder with cold glue • 2 jogging elements perfect binder • hand fed • clamp pitch 24" • infeed chanel with jogger • resting table • fold pressing station • milling and roughening station • double combined spine preparation station • hot melt spine gluing unit • 2 hot melt spine gluing units • 2 premelters • gauzing station • SF stream cover feeder • cover scoring 2 to 6 lines • SF cover nipping and pressing station • 2nd SF cover pressing station • lay down device

Ref.-Nr:
28231
Manufacturer:
Müller Martini
New
Müller Martini 1534 Uno Stacker
Müller Martini 1534 Uno Stacker

Built in: 1996 Size max: 500 x 320 x 80 mm Speed max: 16.000 c/h Installed Power: 2.2 kW Air Consumption: 17 Nm³/h Approximate Weight: 720 kg (1,590 lbs) Equipment • 1 set of operator manuals • spare part catalogue • 1 set of electrical diagrams • standard equipment

Ref.-Nr:
28223
Manufacturer:
Müller Martini
New
Müller Martini 377 Avanti Plus
Müller Martini 377 Avanti Plus

Built in: 2004 Configuration: Left-hand delivery Equipped with: Left-hand delivery Mosca strapping unit Applications: Offset and gravure signatures Mechanical Infeed Speed: Maximum 1.0 m/s Cycle Time: Minimum 32 s/log Signature Sizes: Minimum: 200 × 110 mm (7 7/8" × 4 3/8") Maximum: 480 × 320 mm (18 7/8" × 12 5/8") Page Count: Depending on paper quality and basis weight Minimum: 8 pages Maximum: 144 pages Compressed Log Length: Standard machine: 800 to 1,200 mm (31 1/2" to 47 1/4") With special insert (optional): 500 to 860 mm (19 3/4" to 33 7/8") Strapping System: Mosca RO-TRC-3 Strapping Material: 12 mm (15/32") wide PP or PET strap Endboard Hopper Capacity: Maximum 100 endboards with 10 mm (3/8") thickness Endboard Thickness: Minimum: 5 mm (3/16") Maximum: 13 mm (1/2") Endboard Insertion: Automatic Shingle Spacing: Minimum 30 mm (1 1/8") Shingle Side Variation: Maximum ±15 mm (5/8") Power Consumption: Approx. 4.5 kW (with manual crane) Approx. 4.0 kW (without manual crane) Air Consumption: 5 Nm³/h at 6 bar (3 cfm at 90 psi) Machine Weight: 4,100 kg (9,000 lb)

Ref.-Nr:
28014
Manufacturer:
Müller Martini
New
Müller Martini Fontana
Müller Martini Fontana

Built in: 2007 Equipment: Controlled Infeed Belt Self Adjusting Gripper Carriage Turntable for Rotation of Stackers Auto Layer Sheet Feeder Pallet Dispenser Touch Screen Computer Roller Delivery

Ref.-Nr:
27465
Manufacturer:
Müller Martini

About us

Your partner for used machinery since 1985

Founded in 1985 by Axel Langelüddecke, german graphics has grown from a sales partner into a full-service company for the graphic arts industry.

From our headquarters in Helmstedt we offer more than 600 used machines for inspection on over 25,000 m² – one of the largest stocks of its kind worldwide.

Services

Everything from one source

  • Sales
  • Purchase
  • Storage
  • Rigging
  • Transportation
  • Installation
  • Dismantling
  • Liquidation
  • Reconditioning
  • Consultation
  • Operator training
  • Technical support

Brands

Machines from all leading manufacturers

A selection of the brands most often in our stock – click a brand to see all available machines.

Browse all machines