Built in: 1990 Size: 720 x 1.500 mm Speed: 10-180 m/min Equipment: • continuous feeder 1st folding unit: • 6 buckle plates • noise prevention 2nd folding unit: • 4 buckle plates • noise prevention 3rd folding unit: • cross fold knife
- Ref.-Nr:
- 23053a
- Manufacturer:
- MBO
Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery
- Ref.-Nr:
- 21997c
- Manufacturer:
- MBO
MBO mobile corner conveyor table ET 46 with ball rail ET 46 can be swiveled through 180° suitable for both left and right installation. The ET 46 alignment ruler is equipped with a ball bar for standard products. Format: 46 cm
- Ref.-Nr:
- 27276
- Manufacturer:
- MBO
Built in: 2006 Infeed width: max 480 mm; min 150 mm Infeed length: max 320 mm; min 80 mm Infeed height: max 650 mm; min 450 mm Product thickness: max 60 mm Speed: max 160 m/min
- Ref.-Nr:
- 26335
- Manufacturer:
- MBO
Built in: 2008 Size max: 820 x 1.750 mm Size with pallet feeder: max 820 x 1.200 mm; min 150 x 270 mm Size with continuous feeder: max 820 x 1.750 mm; min 150 x 150 mm Speed: max 205 m/min Length with pallet feeder: 5.180 mm Length with continuous feeder: 7.680 mm Width: 3.210 mm Cross folding: 16 pages Equipment feeder control: • Vacutable • Vacubelt • counter 1st parallel folding unit: • pre-slitter shafts • 4 buckle plates • motorized setting of buckle plates • spiral folding rollers • slitter shaft cassette MWK • noise prevention 1st cross-fold unit: • cross fold knife • buckle after cross-fold right • slitter shaft after cross-fold • spiral folding rollers 2 nd cross fold unit: • cross fold knife left • spiral fold rollers condition: • cleaned & checked available: • immediately
- Ref.-Nr:
- 26333
- Manufacturer:
- MBO
Baujahr: 2006 Format max: 450 x 320 mm Format min: 150 x 80 mm Einlaufhöhe max: 950 mm Einlaufhöhe min: 450 mm Leistung max: 40 - 160 m/min Bogenleistung max: 12.000 c/h Produktdicke max: 6 mm Kraftbedarf: 0,37 kW (220/380V, 50Hz) Ausstattung •: Kreuzbruch-Falzschwert • Fahrbar • 180° schwenkbar • Spiralwalzen
- Ref.-Nr:
- 25391
- Manufacturer:
- MBO
Built in: 1999 Size: max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed: max 205 m/min Length with continuous feeder: 7.680 mm Width: 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery
- Ref.-Nr:
- 25374
- Manufacturer:
- MBO
Size max 460 x 650 mm min 105 x 150 mm Speed max 160 m/min Power requirements 2,3 kW (220/380V, 50Hz) Length 2.610 mm Width 1.100 mm Equipment feeder: flat pile feeder counter 1st folding unit: 4 buckle plates noise prevention 2nd folding unit: knife-folding unit delivery belt delivery
- Ref.-Nr:
- 25339
- Manufacturer:
- MBO
Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left delivery: • delivery A 56
- Ref.-Nr:
- 25275
- Manufacturer:
- MBO
Size with continuous feeder: max 760x2000 mm min 150x180 mm Size cross fold: min 150x200 mm Size threefold: min 200x300 mm Size four fold: min 300x400 mm Speed: max 180 m/min Equipment feeder: • continuous feeder • vacutable 1st parallel folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left & right standard accessories: • 1 set of operator manuals • 1set of electrical diagrams • further information: • as is, cleaned available: • immediately
- Ref.-Nr:
- 25261
- Manufacturer:
- MBO
Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery
- Ref.-Nr:
- 25033
- Manufacturer:
- MBO
Built in: 1998 Size: max 840 x 1200 mm min 170 x 250 mm Speed: max 40-180 m/min Equipment: feeder: • pallet feeder 1st parallel folding unit: • 6 buckle plates • rear-mounted slitter shafts 2 nd cross fold unit: • cross fold knife 3 rd cross fold unit: • noise prevention over all three units peripheral units and deliveries: • belt delivery optionales equipment:--not included--- • gate fold attachment
- Ref.-Nr:
- 24401
- Manufacturer:
- MBO
Built in: 1994 Size: max 760 x 1120 mm Size: min 150 x 180 mm Speed: max 10-200 m/min Length: 5473 mm Width: 2730 mm Equipment: feeder: • continuous feeder control: • counter MCC 3 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • 4 buckle plates • noise prevention 3rd folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery
- Ref.-Nr:
- 24370
- Manufacturer:
- MBO
Built in: 1995 Size: max 760 x 1120 mm Size: min 150 x 180 mm Speed: max 10-200 m/min Equipment: feeder: • continuous feeder control: • MS-control 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • 4 buckle plates • noise prevention 3rd folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries: • belt delivery
- Ref.-Nr:
- 24369
- Manufacturer:
- MBO
Built in: 1997 Size: max 760 x 1120 mm Size: min 150 x 180 mm Speed: max 10-200 m/min Length: 5473 mm Width: 2730 mm Equipment: feeder: • continuous feeder control: • MS-control 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • 4 buckle plates • noise prevention 3rd folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries:
- Ref.-Nr:
- 24368
- Manufacturer:
- MBO
Built in: 2002 Size: max 1.120 x 1.450 mm min 250 x 250 mm Speed: max 10-160 m/min Equipment: feeder: • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery
- Ref.-Nr:
- 24342
- Manufacturer:
- MBO
Built in: 1998 Equipment: feeder: • continuous feeder • counter IZVA 342 T 1st folding unit: • 4 buckle plates • buckle plates with swing deflectors • rear-mounted slitter shafts • noise prevention 2nd folding unit: • 4 buckle plates • buckle plates with swing deflectors • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 4 buckle plates • buckle plates with swing deflectors • rear-mounted slitter shafts • noise prevention • belt delivery
- Ref.-Nr:
- 23524
- Manufacturer:
- MBO
Built in: 1984 Size: 690 x 1.500 mm Speed: 180 m/min Equipment: • continuous feeder • counter IZVA 342 T 1st parallel folding unit: • 4 buckle plates • spiral folding rollers • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife • slitter shaft after cross-fold • spiral folding rollers 2 nd cross fold unit: • cross fold knife left • spiral fold rollers delivery: • belt delivery
- Ref.-Nr:
- 22841
- Manufacturer:
- MBO
Built in: 2002 Size: 660 mm Speed: 180 m/min Equipment: • stream delivery with pressing and marking device ASP 66-2ME
- Ref.-Nr:
- 22700
- Manufacturer:
- MBO
Size: 810 x 1.500 mm Speed: 10-180 m/min Equipment: • continuous feeder • MC-control 1st folding unit: • 6 buckle plates • separate deflectors • noise prevention 2nd folding unit: • 6 buckle plates • separate deflectors • noise prevention 3rd folding unit: • 4 buckle plates • separate deflectors • noise prevention
- Ref.-Nr:
- 22699
- Manufacturer:
- MBO
Built in: 1985 Size: 810 x 1.500 mm Speed: 180 m/min Equipment: • continuous feeder • counter IZVA 342 T 1st folding unit: • pre-slitter shafts • 4 buckle plates • spiral folding rollers • soft-polyurethane folding rollers • rear-mounted slitter shafts • noise prevention • double production device 2nd folding unit: • cross-fold knife 3rd folding unit: • three-fold knife left • spiral folding rollers • slitting shaft after three-fold • noise prevention • standard perforating and scoring delivery: • belt delivery
- Ref.-Nr:
- 22668
- Manufacturer:
- MBO
Built in: 1996 Size: 660 x 1.020 mm Speed: 10-200 m/min Equipment: • continuous feeder • counter 1st folding unit: • 4 buckle plates • noise prevention 2nd folding unit: • 4 buckle plates • noise prevention 3rd folding unit: • 4 buckle plates • noise prevention • flat pile delivery
- Ref.-Nr:
- 22126
- Manufacturer:
- MBO
Size: 1.300 x 1.650 mm Speed: 150 m/min Equipment: feeder: • pallet feeder (MABEG) • counter MCC 3 1st folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: • separate deflectors • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention 4th folding unit: • separate deflectors • 2 buckle plates • rear-mounted slitter shafts • noise prevention
- Ref.-Nr:
- 21999
- Manufacturer:
- MBO

