Skip to main content Skip to search Skip to main navigation
Filter products
Kolbus HD 151 P
Kolbus HD 151 P

Built in: 1998  Size:  max 310 x 400 x 80 mm  Size trimmed:  max 300 x 388 x 80 mm  min 100 x 120 x 2 mm  Speed:  max 6.000 c/h  Feeding height:  max 80 mm  Air requirement (6 bar) 30 m³/h  Length: 2.300 mm  Width: 2.200 mm  Height: 2.500 mm  Weight: 5.700 kg (approx.)

Ref.-Nr:
25990d
Manufacturer:
Kolbus
Kolbus KM 472
Kolbus KM 472

Built in: 1998/2008  Size:  max 460 x 310 x 60 mm  min 125 x 100 x 3 mm  Product thickness:  max 60 mm  min 3 mm  Speed:  max 8.000 c/h   Equipment  gathering machine:  • 16 stations  • gatherer ZU 804  intermediate elements:  • reject unit  • endsheet feeder  • -connected with  perfect binder:  • 27 clamps  • milling and roughening station  • 1st hotmelt spine gluing base  • intermediate drying unit  • 2nd hotmelt spine gluing base  • hotmelt spine gluing unit  • hotmelt side gluing unit  • 2 premelters  • gauzing station  • stream cover feeder  • cover pressing station  • 2. cover pressing station  • lay down device

Ref.-Nr:
25990a
Manufacturer:
Kolbus
Kolbus AE 360
Kolbus AE 360

Built in 2001  operating voltage 230/400 V; 3~ operating voltage 50 Hz

Ref.-Nr:
24841k
Manufacturer:
Kolbus
Kolbus PUR spine gluing unit
Kolbus PUR spine gluing unit

Ref.-Nr:
24415b
Manufacturer:
Kolbus
Kolbus HD 151 P
Kolbus HD 151 P

Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories further information condition: as is, cleaned available: immediately

Ref.-Nr:
23886c
Manufacturer:
Kolbus
Kolbus KM 470
Kolbus KM 470

Built in: 1997  Size: 460 x 310 x 60 mm  Speed: 6.000 c/h  Equipment: gathering machine: • 16 stations  • gatherer ZU 801  controls  • missing and double sheet control  intermediate elements  • spiral raceway  • hand fed  • jogging element  • criss-cross delivery  • -connected with  perfect binder  • 21 clamps  • jogging station  • milling and roughening station  • hotmelt spine gluing unit  • hotmelt side gluing unit  • premelter  • gauzing station  • stream cover feeder  • cover scoring 2 to 6 lines  • cover pressing station  • lay down device  • shingle conveyor delivery optionales Equipment:--not included--  • extending of the gathering machine  • Opticontrol signature image reader  • conveyer system ca. 20 m  • three knife trimmer Kolbus HD 150

Ref.-Nr:
23586b
Manufacturer:
Kolbus
New
Kolbus SU 651
Kolbus SU 651

Built in: 2006 For automatic jacketing of books with square or rounded spine. Description: - Automatic jacket feeder (non stop) - Scoring station - Book opening station - Delivery to the right Technical specifications: Booksize: (width x height x thickness) max.: 300 x 390 x 80 mm min.: 95 x 125 x 8 mm Block thickness: min.: 6 mm Jacket size: max.: 900 x 390 mm min.: 300 x 125 mm Flap width: max.: 150 mm min.: 50 mm Scoring rail distance: max.: 680 mm min.: 200 mm Mechanical speed: max.: 65 cycles/min

Ref.-Nr:
29166
Manufacturer:
Kolbus
New
Kolbus DA 270 round corner
Kolbus DA 270 round corner

Built in: 2006 Size max: 670x390 mm min: 205x140 mm Speed: 3.900 c/h Description: - with round corner device - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery

Ref.-Nr:
29165
Manufacturer:
Kolbus
New
Kolbus HD 143 P
Kolbus HD 143 P

Year: 2016 Right hand infeed - ⁠Copilot - ⁠Automatic setup - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Ref.-Nr:
29143
Manufacturer:
Kolbus
Kolbus HD 140 P
Kolbus HD 140 P

Machine number: 349 Built in: 2000 Size max: 305 x 420 mm Size trimmed max: 300 x 400 mm Size trimmed min: 100 x 100 mm Book block thickness max: 80 mm Book block thickness min: 2 mm Feeding height: 80 mm Speed max: 3.900 c/h Length: 2.400 mm Width: 3.060 mm Height: 1.740 mm Weight: 5.290 kg (approx.) Equipment •: automatic infeed with integrated pre stacker • gripper loading • cut counter • automatical speed regulation • offcut blower • Equipment for sheet-fed • 1 set of clamping plates and holders • 1 set cutting table • 3 sets of cutting sticks • 2 set of knives • automatic lock of knife adjustment and pressing block • external knife changing device • copilot • automatic setting of • - infeed device • - bookblock pressure • - cutting table • - side knives • - side gauges • - height of the delivery clamp • central lubrication • delivery clamp

Ref.-Nr:
29120
Manufacturer:
Kolbus
Kolbus KM 411C
Kolbus KM 411C

Built in: 2006 Size max: 320 x 510 x 70 mm Speed max: 15.000 c/h Gatherer: 18 stacions ZU 841 - Optical sheet control: SignalLynx - ATC thikness control 1 Reject AS 841 Perfectbinder: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Base for 1st spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Stream cover feeder: SAL 411.C - Scoring station max: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system: Kolbus TSE - Transport system, length (approx) 50 meters - Conveyor tower Ambaflex - Reject unit Three knife trimmer: Kolbus HD 152P • counter: 14,367 mio—only!!! - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Stacker - Rima Stacker 3310 ( Kolbus XRS 130) - Rima Statik device 110

Ref.-Nr:
29034
Manufacturer:
Kolbus
New
Kolbus HD 152.P
Kolbus HD 152.P

Built in: 2006 Size: 310 x 430 x 80 mm Size trimmed: 300 x 420 mm Size trimmed min: 100 x 120 x 2 mm Feeding height max: 80 mm Speed max: 6.600 c/h Description: - Left hand infeed - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Condition: Cleaned good working conditon

Ref.-Nr:
29033
Manufacturer:
Kolbus
Kolbus 151.P
Kolbus 151.P

Maschinen Nr.: 534 Built in: 2000 Maximum Mechanical Speed: Up to 110 cycles/min Max. Individual Product Output: 13,000 products/hour Trimmed Format (Min. W x H x T): 100 x 120 x 2 mm Trimmed Format (Max. W x H x T): 300 x 388 x 80 mm Untrimmed Format (Max.): 310 x 400 x 80 mm Max. Pile Height (Infeed): 80 mm Max. Pressing Force: 20 KN (infinitely variable) Max. Front Trim Off-cut: 40 mm Max. Head/Foot Trim Off-cut: 50 mm Machine Length (Approx.): 2,410 mm Machine Width (Approx.): 2,260 mm Machine Height (Approx.): 1,740 mm Approximate Weight: 5,700 kg Control System: Kolbus Co-Pilot (Common) Air Consumption: 50 Nm^3/h or 30 m^3/h at 6 bar Exhaust Capacity (Trimmings): 4,000 m^3/h, 2,000 Pa Electrical Connection: 230/400 V, 3 phase, 50 Hz

Ref.-Nr:
28921
Manufacturer:
Kolbus
Kolbus KM 490
Kolbus KM 490

Machine number: 135 Built in: 1993 Size: max 510 x 290 x 65 mm min 125 x 100 x 3 mm Book block thickness: max 65 mm min 3 mm Speed: max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts

Ref.-Nr:
28920
Manufacturer:
Kolbus
Kolbus HD 142.P
Kolbus HD 142.P

Built in: 2003 Size trimmed max: 300 x 420 x 80 mm Size trimmed min: 100 x 100 x 2 mm Size max: 305 x 430 mm Pile height: 80 mm Press capacity max: 20 kN Speed max: 3.900 c/h Air pressure: 6 bar Compressed air: 40 Nm³/h - 6 bar Electric supply: 400/50 V/Hz/A Length: 3.300 mm Width: 3.060 mm Height: 1.740 mm Weight: 5.170 kg (approx.) Equipment • copilot • right hand infeed • feeder • control with touchscreen • equipment for changing the format

Ref.-Nr:
28207
Manufacturer:
Kolbus
Kolbus KM 410 D
Kolbus KM 410 D

Equipment   gathering machine  • 6 stations  • gatherer Ferag  • reject unit  • 2 jogging elements perfect binder  • perfect binder Publica KM 410  • copilot with touch screen  • 40 clamps  • infeed incl. coupling with ZU  • 2 milling stations  • strip milling head  • 4 spine preparation stations  • hotmelt spine gluing unit  • 2nd hotmelt spine gluing unit  • hotmelt side gluing unit  • 3 premelters  • stream cover feeder SAL 411  • cover scoring 4 lines  • 2 pressing stations  • straight delivery  • lay down device  • quality control with individual product rejection conveyor system  • length ca. 50 m  • drying tower XAF  • intermediate delivery  • belt control cabinet TS.E three knife trimmer  • three knife trimmer HD 152.P  • right hand infeed with pre stacker  • copilot with touch screen  • cutting tables  • knife adjustment device  • 2 sets of knives compensating stacker  • compensating stacker CB 16  • counting device  • delivery right

Ref.-Nr:
27901
Manufacturer:
Kolbus
Kolbus KM 410 C
Kolbus KM 410 C

Built in: 2001-2003  Size: max 290 x 420 x 65 mm; min 100 x 105 x 3 mm  Speed: max 15.000 c/h Equipment gathering machine  • chain tensioner  • 12 stations  • gatherer ZU 840  • 8 streamfeeder STA 840  • reject unit AS 840 controls  • opticontrol signature image reader intermediate elements  • reject unit  • jogging element perfect binder  • Copilot  • Monitor control  • 23 clamps  • jogging station  • resting table  • fold pressing station  • milling and roughening station  • equalizing-leveling station  • hotmelt spine gluing unit  • hotmelt side gluing unit  • 2 premelters  • stream cover feeder  • cover pressing station  • smooth lay down device conveyor system  • bypass for splitting saw splitting saw  • turnover belt  • connected with three knife trimmer  • destacker  • information three knife trimmer: HD 151 P compensating stacker  • information compensating stacker: Müller Martini CB 16 standard accessories  • pv pressure-vacuum pump  • 1 set of electrical diagrams  • 1 set of spare part catalogues  • 1 set of tools further information  • machine can be tested in production  • condition: working condition

Ref.-Nr:
27091
Manufacturer:
Kolbus
Kolbus KM 472 A
Kolbus KM 472 A

Built in 2002  Size:  max 460 x 310 x 60 mm  min 125 x 100 x 3 mm  Product thickness:  max 60 mm  min 3 mm  Speed:  max 8.000 c/h    Equipment  gathering machine  18 stations  gatherer ZU 840  gathering pockets with ATC (auto section thickness control)  reject unit AS 840 Machine can be extended with more gatherers.  controls  missing and double sheet control  intermediate elements  jogging element  Copilot  27 clamps  milling and roughening station  2nd hotmelt spine gluing unit  hotmelt side gluing unit  2 premelters  stream cover feeder  cover pressing station  2. cover pressing station  lay down device

Ref.-Nr:
26332
Manufacturer:
Kolbus
Kolbus ZU 804
Kolbus ZU 804

Built in 2003  Size:  max 460 x 310 mm  min 125 x 100 mm  Pile height magazine: max 240 mm  Speed: max 8.000 c/h Equipment:  gathering machine  • 24 stations

Ref.-Nr:
25481
Manufacturer:
Kolbus
Kolbus DA 270
Kolbus DA 270

Built in 2003  Size  max 670x390 mm  min 205x140 mm  Speed 3.900 c/h

Ref.-Nr:
25352
Manufacturer:
Kolbus
Kolbus PE 311
Kolbus PE 311

Built in 1994 Equipment  embossing press:  • case magazine with case bending device DBA (without feeding conveyor)  • foil feeder with two pairs of foil feeding rollers  • electric counter  • delivery conveyor to the right

Ref.-Nr:
25286
Manufacturer:
Kolbus
Kolbus STA 840
Kolbus STA 840

Build in: 2002

Ref.-Nr:
24815
Manufacturer:
Kolbus
24415
Kolbus KM 470

Built in: 1998  Size: max 460 x 310 x 60 mm  min 125 x 100 x 3 mm  Speed: max 6.000 c/h  Equipment:  gathering machine:  • 16 stations  • gatherer ZU 801  • -connected with  perfect binder:  • 17 clamps  • milling and roughening station  • brushing station  • hotmelt spine gluing unit  • hotmelt side gluing unit  • 2 premelters  • stream cover feeder  • cover scoring  • cover pressing station  • smooth lay down device  option - not included:  • PUR spine gluing unit

Ref.-Nr:
24415
Manufacturer:
Kolbus
23995
Kolbus TR 160

Built in: 1998  Size: 510 x 305 mm  Speed: 20.000 c/h

Ref.-Nr:
23995
Manufacturer:
Kolbus