Skip to main content Skip to search Skip to main navigation
Filter products
SMB PRO
SMB PRO

Baujahr 2014 Cross strap, bundles/minute 32/ opt. 36 At table belt speed in m/s 1 Based on bundle size l x w in mm 300 x 210 Depending on tension force Width in mm 150 - 420 Length in mm 150 - 420 Height in mm 10 - 400 Weight in kg max. 25 TRANSPORT SPEED m/s 0,20 - 1,00 Steplessly adjustable Automatic strap tensioning, stepless, depending on height of bundle Tension at bundle in N max. 325 Tension path in mm max. 200 STRAPPING MATERIAL Polypropylene DIN EN 13 394 Width in mm 5 - 9 Thickness in mm: 0.4 - 0.55 Heat seal. Tensile strength of welded joint is approx. 80% of the breaking strength of the strap Core ID in mm 200 Core OD in mm 420 Width in mm 190 (160,180,200) Wide Range Input 380-520V, 3AC; 47 63 Hz Maximum fusing 16A (B-character) Protection Type: IP 54 Power consumption in kW approx.: 0,75 Total weight approx. in kg 830

Ref.-Nr:
27692
Manufacturer:
SMB
SMB PRO
SMB PRO

Baujahr 2014 Cross strap, bundles/minute 32/ opt. 36 At table belt speed in m/s 1 Based on bundle size l x w in mm 300 x 210 Depending on tension force Width in mm 150 - 420 Length in mm 150 - 420 Height in mm 10 - 400 Weight in kg max. 25 TRANSPORT SPEED m/s 0,20 - 1,00 Steplessly adjustable Automatic strap tensioning, stepless, depending on height of bundle Tension at bundle in N max. 325 Tension path in mm max. 200 STRAPPING MATERIAL Polypropylene DIN EN 13 394 Width in mm 5 - 9 Thickness in mm: 0.4 - 0.55 Heat seal. Tensile strength of welded joint is approx. 80% of the breaking strength of the strap Core ID in mm 200 Core OD in mm 420 Width in mm 190 (160,180,200) Wide Range Input 380-520V, 3AC; 47 63 Hz Maximum fusing 16A (B-character) Protection Type: IP 54 Power consumption in kW approx.: 0,75 Total weight approx. in kg 830

Ref.-Nr:
27691
Manufacturer:
SMB
Müller Martini Robusto
Müller Martini Robusto

Built in: 2006 Size: max 480 x 330 mm; min 148 x 105 mm Speed: max 30.000/18.000 c/h Equipment delivery right

Ref.-Nr:
27682
Manufacturer:
Müller Martini
GUK FA 54/4 HT
GUK FA 54/4 HT

Baujahr 2008 Max format: 540 x 800 mm Min format: 150 x 190 Max speed: 40.000 sh/h counter 1st folding unit: kombi folding rollers rear-mounted slitter shaft noise prevention belt delivery

Ref.-Nr:
27648
Manufacturer:
GUK
Stahl SBP 46.2
Stahl SBP 46.2

Horizontal stack press delivery Sheet size min. (width × length) 120 × 100mm Sheet size max. (width × length) 460 × 300mm Product thickness max. 4mm Pile length 800mm Pressing force 8,000 N Infeed height 360-960mm

Ref.-Nr:
27643
Manufacturer:
Stahl
GUK FA 54-4 HT STAT 2
GUK FA 54-4 HT STAT 2

Baujahr 2007 Max format: 540 x 800 mm Min format: 150 x 190 Max speed: 40.000 sh/h Hight adjustment counter folding unit: 2nd kombi folding rollers rear-mounted slitter shaft noise prevention

Ref.-Nr:
27638
Manufacturer:
GUK
Tip
GUK FA 54-4 HT STAT 2
GUK FA 54-4 HT STAT 2

Baujahr 2007 Max format: 540 x 800 mm Min format: 150 x 190 Max speed: 40.000 sh/h counter 1st folding unit: kombi folding rollers rear-mounted slitter shaft noise prevention

Ref.-Nr:
27637
Manufacturer:
GUK
GUK FA 54/4 HT
GUK FA 54/4 HT

Baujahr 2005 Max format: 540 x 800 mm Min format: 150 x 190 Max speed: 40.000 sh/h counter 1st folding unit: kombi folding rollers rear-mounted slitter shaft noise prevention belt delivery

Ref.-Nr:
27630
Manufacturer:
GUK
WTT 40.10.10
WTT 40.10.10

Baujahr 2008 heavy-duty pallet lifter 0.75 kW motor operating pressure of 200 bar speed of 21 seconds per mete capacity of 1000 daN

Ref.-Nr:
27622
Manufacturer:
WTT
Buskro BK700
Buskro BK700

Wachs-Tintenstrahl III. Baujahr 2007 Buskro BK 700 Inkjet System w/ Compose IQ Software, Dryer, and Delivery Conveyor INKJET SYSTEM DESCRIPTION The Buskro BK700 Portable Controller is a stand-alone ink-jet controller primarily designed to integrate Buskro’s Inkjet technologies to other transport bases or finishing lines. The BK700 was also designed to connect to standard Buskro transport bases to operate as a complete turnkey inkjet system. In addition, the BK700 is a fully modular system designed to accommodate the Apollo, Atlas, Atlas-UVC, and Elite+ inkjet technologies by selecting the appropriate inkwell and printheads. INKJET SYSTEM SPECIFICATIONS Overall Length 24.24” 616 mm Overall Height Including monitor 69.00” 1753 mm Overall Width Including inkwell 21.75 552 mm Weight 150 lbs 409 kg Line Voltage 115 or 200 or 230 VAC Line Current 8 Amps (115 VAC) or 4 Amps (200/230 VAC) Power 920 VA, maximum CPU Pentium 4 Memory 256 MB DDR RAM Hard Drive 10.0 GB, IDE Controller Floppy Drive 1.44 MB, 3 ½” CD-ROM 8X, IDE Controller Video Display 800 x 600, 16-Bit Color Keyboard 101 US Mouse Trackball Operating System WindowsTM XP Professional Imaging Software Compose IQ

Ref.-Nr:
27610
Manufacturer:
Buskro
Flexsystems HVT 215 - Vakuum-Fördertisch
Flexsystems HVT 215 - Vakuum-Fördertisch

Transport Type Dual Length 51” + 33”, 130 cm + 85 cm Height 27.5” - 39.5” (70 cm - 100 cm) Width 32” (82 cm) Max. product width 19” (48 cm) Belts 2 x 3” (8 cm) fixed center vacuum belts + 2 x 3” (8 cm) outside belts Optional 17” (43 cm) wide belt Speed Up to 500 ft/min (2.5 m/sec) Physical Power 110 / 220 VAC Weight 485 lbs (220 kg) Specialty’s flexible vacuum transport bases height adjustable variable speed change of movement direction (left/right) mobility (on wheels) very easy operation. These bases can be used as stand alone or in combination and can be fully interlocked to work inline with existing production lines or other modules. Dual Base A dual base (2 bases in one frame with split belts) is perfect for mounting an inkjet system with a dryer (IR or UV). There is enough space for post-drying the ink under an IR or UV-curing stations. Heat resistant belts are available as an option.

Ref.-Nr:
27595
Manufacturer:
Flexsystem
Buhrs Seitenstapler
Buhrs Seitenstapler

friction feeder with adjustable interface, 970 mm high

Ref.-Nr:
27560
Manufacturer:
Buhrs
Buhrs Seitenstapler - Friction Feeder
Buhrs Seitenstapler - Friction Feeder

friction feeder with adjustable interface, 970 mm high

Ref.-Nr:
27559
Manufacturer:
Buhrs
Müller Martini Prima Plus
Müller Martini Prima Plus

Baujahr: 2007 Technische Daten:   Format: max 480 x 320 mm  Formate unbeschnitten mit Nachfalz: max 480 x 320 mm  min 105 x 115 mm  mit Zusatz 90 x 80 mm  Formate unbeschnitten mit Vorfalz: max 480 x 300 mm  min 105 x 125 mm  Mechanische Geschwindigkeit: Kettenteilung 21" 14.000 c/h  Antriebsleistung: max 11 kW  Druck-Vakuumpumpen: projektabhängig Druckluft (bauseits): projektabhängig 6 bar Ausstattung:  Sammelkette & Anleger:  · 8 Stationen Sammelkette Anleger:  · 5 Anleger 370 Falzanleger:  · 1 Falzanleger 1529 Heftstation:  · 1 Heftstation 390 · 1 18" inch Kettenteilung · 1 Übergabe rechts · 1 Heftdraht-Abspulvorrichtung · 1 Dickenkontrolle / Plus-Minus · 1 Schrägbogen- und Längenkontrolle Heftköpfe:  · 2 Heftköpfe HK 75 Dreischneider:  · 1 Dreischneider 449 Messer:  · 2 Satz Messer Standards:  · 1 Standard Zubehör · 1 Standard Werkzeug Zustand:  · produktionsbereit Verfügbar:  · sofort · Maschine kann in Produktion besichtigt werden Optionales Zubehör (nicht mit im Lieferumfang enthalten):  · Zusätzliche Anleger · Doppelnutzeneinrichtung · Kreuzleger · Kartenkleber · Einsteckmaschinen · Inkjetanlagen Auch wenn die technischen Daten mehrheitlich aus Herstellerbroschüren entnommen sind, bleiben sie unverbindlich und sind nicht Teil des Vertrages. Es wird keine Garantie für Vollständigkeit und Richtigkeit dieser Daten gegeben.

Ref.-Nr:
27549
Manufacturer:
Müller Martini
Müller Martini Prima Plus
Müller Martini Prima Plus

Baujahr: 2005 Technische Daten:   Format: max 480 x 320 mm  Formate unbeschnitten mit Nachfalz: - max 480 x 320 mm  - min 105 x 115 mm  - mit Zusatz 90 x 80 mm  Formate unbeschnitten mit Vorfalz: - max 480 x 300 mm  - min 105 x 125 mm  Mechanische Geschwindigkeit: Kettenteilung 21" 14.000 c/h  Antriebsleistung: max 11,0-18,0 kW  Druck-Vakuumpumpen: projektabhängig Druckluft (bauseits): projektabhängig 6 bar    Ausstattung:   Sammelkette & Anleger: · 8 Stationen Sammelkette Anleger:   · 5 Anleger 370 · 1 Falzanleger 1529 Heftstation:   · 1 Heftstation 390 · 1 18" inch Kettenteilung · 1 Übergabe rechts · 1 Heftdraht-Abspulvorrichtung · 1 Dickenkontrolle / Plus-Minus · 1 Schrägbogen- und Längenkontrolle: Heftköpfe:   · 2 Heftköpfe HK 75 Dreischneider: · 1 Dreischneider 449 Messer:   · 2 Satz Messer Standards:   · 1 Standard Zubehör · 1 Standard Werkzeug Zustand: produktionsbereit Verfügbar: sofort · Maschine kann in Produktion besichtigt werden   Optionales Zubehör (nicht mit im Lieferumfang enthalten):   · Zusätzliche Anleger · Doppelnutzeneinrichtung · Kreuzleger · Kartenkleber · Einsteckmaschinen · Inkjetanlagen Auch wenn die technischen Daten mehrheitlich aus Herstellerbroschüren entnommen sind, bleiben sie unverbindlich und sind nicht Teil des Vertrages. Es wird keine Garantie für Vollständigkeit und Richtigkeit dieser Daten gegeben.

Ref.-Nr:
27546
Manufacturer:
Müller Martini
Stahl SBP 46.2
Stahl SBP 46.2

Horizontal stack press delivery Sheet size min. (width × length) 120 × 100mm Sheet size max. (width × length) 460 × 300mm Product thickness max. 4mm Pile length 800mm Pressing force 8,000 N Infeed height 360-960mm

Ref.-Nr:
27538
Manufacturer:
Stahl
Hunkeler UW6/R Ab-/Aufwickler
Hunkeler UW6/R Ab-/Aufwickler

Baujahr 2007 Hunkeler UW6/R Ab-/Aufwickler Hunkeler UW 6 unwinding station maximum reel diameter 1320mm web width 165 – 520mm paper weight 40 – 300GSM web speed 10 -220m/min touch screen control adjustable photocell maximum & minimum reel diameter

Ref.-Nr:
27536
Manufacturer:
Hunkeler
Buhrs RF4
Buhrs RF4

Baujahr 2001 rotary feeders with adjustable interface, 970 mm high

Ref.-Nr:
27530
Manufacturer:
Buhrs
Nordson EPC 30 + ProBlue 4 Glue Machine
Nordson EPC 30 + ProBlue 4 Glue Machine

Nordson EPC 30 pattern control system 4 OUT / 2 IN IP54 24 VDC 4-20 MA ECLIPSE + Nordson ProBlue 4 holding capacity on the Nordson ProBlue 4 is 3.9 kg and a melt rate of 4.3 kg/hr 1 glue head

Ref.-Nr:
27501
Manufacturer:
Nordson
New
Müller Martini Fontana
Müller Martini Fontana

Built in: 2007 Equipment: Controlled Infeed Belt Self Adjusting Gripper Carriage Turntable for Rotation of Stackers Auto Layer Sheet Feeder Pallet Dispenser Touch Screen Computer Roller Delivery

Ref.-Nr:
27465
Manufacturer:
Müller Martini
Müller Martini Fontana Palletiser
Müller Martini Fontana Palletiser

Build 2007 Controlled Infeed Belt Self Adjusting Gripper Carriage Turntable for Rotation of Stackers Auto Layer Sheet Feeder Pallet Dispenser Touch Screen Computer Roller Delivery

Ref.-Nr:
27464
Manufacturer:
Müller Martini
Müller Martini Streamfeaders
Müller Martini Streamfeaders

Baujahr 2001

Ref.-Nr:
27460
Manufacturer:
Müller Martini
GUK ZK 500 Mobile Knife Unit
GUK ZK 500 Mobile Knife Unit

Baujahr 2006 Rotatable folding unit, four-part folds Central roller adjustment with micro-adjustment Height adjustable, mobile, lockable Electrics switchable from automatic to separate operation for third-party machines Inlet width: max. 30 cm min. 11 cm Format length: max. 65 cm min. 16 cm Inlet height: (sword from top) max. 860 mm and min. 520 mm Discharge height: (sword from top) max. 770 mm and min. 430 mm Inlet height: (sword from below) max. 865 mm and min. 525 mm Discharge height: (sword from below) max. 970 mm and min. 630 mm Speed: 40 – 130 m/minute, infinitely variable via electronic speed control Number of cycles: up to approx. 16,000 cycles/hour. Power requirement: 1.0 kW Space requirement: 0.80 x 1.30 m

Ref.-Nr:
27386
Manufacturer:
GUK
SMB Straping Machine PRO
SMB Straping Machine PRO

Baujahr 2018 Cross strap, bundles/minute: 32/ opt. 36 At table belt speed in m/s: 1 Based on bundle size l x w in mm: 300 x 210 Depending on tension force Width in mm: 150 - 420 Length in mm: 150 - 420 Height in mm: 10 - 400 Weight in kg: max. 25 TRANSPORT SPEED m/s: 0,20 - 1,00 Steplessly adjustable Automatic strap tensioning, stepless, depending on height of bundle Tension at bundle in N: max. 325 Tension path in mm: max. 200 STRAPPING MATERIAL Polypropylene DIN EN 13 394 Width in mm: 5 - 9 Thickness in mm: 0.4 - 0.55 Heat seal. Tensile strength of welded joint is approx. 80% of the breaking strength of the strap Core ID in mm: 200 Core OD in mm: 420 Width in mm: 190 (160,180,200) Wide Range Input 380-520V, 3AC; 47 63 Hz Maximum fusing 16A (B-character) Protection Type: IP 54 Power consumption in kW approx.: 0,75 Total weight approx. in kg: 830

Ref.-Nr:
27371
Manufacturer:
SMB