Rima RS 830
Built in: 2002
- Speed: up to 100.000 cph / 80 m/min (product permitting)
- min width product: 101 mm
- max width product: 530 mm
- min length product: 114 mm
- max height / thickness / pagination product: 2-64p(96p) - product permitting
- infeed stream lap: ~25-100 mm
- min width product: ~3 mm
- max width product: ~50 mm
- min product width after trim: ~95 mm
- Trimmming line with 1st trimmer - right bump turn - 2nd trimmer
- Infeed/delivery height: probably ~600 mm >>TBC
- Trimming line - 1st trimmer knife left & right
- Trimming line - 2nd trimmer knife right
- To be used with carbide ring knives
- Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137
- Over all length equipment: ~3500 mm
- Over all width equipment: ~3000 mm
- Over all height equipment: ~1181 mm (@ infeed height~800 mm)
- Input Power: ~13 kW
- Voltage: 400 V, 3 Ph, N, PE, 50 Hz
- Air requirement: practically no air requirement
- Suction capacity per nozzle: 900 m3/h, air speed 31m/s
- Weight: ~800 kg
- Color: RAL 7035, light grey
- Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr),
- Mechanical / electrical machine test possible
- Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream.
- Condition: cleaned & in working conditions
- Machine available: upon request
Topic: | Schneidelinie, rotary cutter |
Built in: | 2002 |